1. Manuals
  2. Brands
  3. EUROCOM Manuals
  4. Laptop
  5. D800P Dream Machine
  6. User manual

EUROCOM D800P Dream Machine User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D800P Dream Machine and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EUROCOM D800P Dream Machine

Summary of Contents for EUROCOM D800P Dream Machine

  • Page 3: Trademarks

    Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Infor- mation contained herein is for reference only and does not constitute a commitment on the part of the man- ufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.

  • Page 4: Fcc Statement

    Preface FCC Statement (Federal Communications Commission) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 5: Important Safety Instructions

    Preface IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

  • Page 6: Instructions For Care And Operation

    Preface Instructions for Care and Operation The computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.
  • Page 7 Preface Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work.

  • Page 8: Power Safety

    Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer. • Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are unsure of your local power specifi- Power Safety cations, consult your service representative or local power company.

  • Page 9: Battery Precautions

    Preface Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the com- puter. • Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode. • Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service personnel.

  • Page 10: Cleaning

    Preface Cleaning Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock.

  • Page 11: Travel Considerations

    Preface Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: Check that the battery pack and any spares are fully charged. Power off the computer and peripherals. Close the display panel and make sure it’s latched.
  • Page 12 Preface On the Road In addition to the general safety and maintenance suggestions in this preface, and the Troubleshooting chapter. Keep these points in mind: Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common.
  • Page 13 Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.
  • Page 14 Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • Position the display to avoid glare or reflections from overhead lighting or outside sources of light. • Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly.

  • Page 15: Table Of Contents

    Preface Contents LED Power, Battery & E-Mail Status Indicators ..........1-7 Notice ................ I Microphone ............ 1-7 Trademarks ............I Hot-Key Buttons ..........1-7 FCC Statement ..........II Power Button ..........1-8 Instructions for Care and Operation ....IV LED Status Indicators ........1-8 Power Safety ..........
  • Page 16 Preface 6-in-1 Flash Card Reader (Optional) ....1-19 Overview ..............2-1 Security Lock Slot ........1-19 The Power Sources ..........2-2 Rear View ...............1-20 AC Adapter ............2-2 DC-In Jack ............1-21 Battery ..............2-3 Four USB Ports ..........1-21 Recharging the Battery with the AC Adapter ..2-3 S-Video-In Port (Optional with Proper handling of the Battery Pack ....
  • Page 17 Preface Function Keys ..........2-20 Advanced Power Management (APM 1.2) ..3-17 TouchPad and Buttons/Mouse .......2-22 Enabling Power Options ........3-18 Configuring the TouchPad and Buttons ...2-22 Conserving Power Through Individual Adding a Printer .............2-23 Components ............. 3-19 USB Printer ............2-23 Monitor Standby ..........
  • Page 18 Preface What to Install ............4-1 Overview ..............5-1 Authorized Driver Message ........4-2 Important BIOS Settings .......... 5-2 Version Conflict Message ........4-3 The Power-On Self Test (POST) ......5-3 RAID Driver Installation ........4-3 Failing the POST ..........5-4 Windows 2000 Professional ........4-5 Fatal Errors ............
  • Page 19 Preface Upgrading the Hard Disk in the 3rd Modular Drive The Wireless LAN & Bluetooth Modules ..... 7-18 (Bay Three) ............6-10 The Wireless LAN Module ........7-19 Some Things to Watch Out For ......6-13 Wireless LAN Driver Installation ....7-19 Software ............6-13 The Bluetooth Module ...........
  • Page 20 Preface Appendix A. Specifications Processor Options ..........A-1 Core Logic ............A-1 Structure .............. A-1 Security ..............A-1 Memory ............... A-1 BIOS ..............A-1 LCD ..............A-1 Display ..............A-2 Storage ..............A-2 Audio ..............A-3 PC Card ............... A-3 Interface ...............

  • Page 21: Introduction

    Introduction Chapter 1: Introduction The Manual Notes This manual refers to the hardware and essential software required to run your Check the light colored boxes with the mark computer. Depending on how your system is configured, some or all of the above to find detailed features described may already be set up.

  • Page 22: Warning Boxes

    Introduction Warning Boxes No matter what your level please pay careful attention to the warning and safe- ty information indicated by the symbol. Also please note the safety and handling instructions as indicated in the Preface . Not Included Operating Systems (e.g. Windows 2000 Professional, Windows XP etc.) have their own manuals, as do applications (e.g.

  • Page 23: Quick Start Guide

    Introduction Quick Start Guide This guide assumes that you are already familiar with computers and can tell at a glance what and where all the key components are. If you are not that com- Peripheral Devices fortable with this type of device, then please refer to the following pages, Please note that pe- which give an overview of the system.

  • Page 24: System Map

    Introduction System Map Your computer has a lot of built-in features. Most of these are enabled by your operating system. Further explanations of the various subsystems are covered in the chapter or pages indicated. Getting to Know Your Computer The following graphics will help you to become familiar with the basic func- tions, and to learn the location of the various ports and components of your computer.

  • Page 25: Top View

    Introduction Top View Figure 1 - 2 Top View with LCD Panel Closed LCD Latch LED Power, Battery & E-Mail Status Indicators To open the LCD display: Place the computer on a stable surface. Move the cover latch to the right to release the top cover. Lift the top cover to reveal the LCD panel and keyboard.

  • Page 26: Top View With Lcd Panel Open

    Introduction Top View with LCD Panel Open Figure 1 - 3 Top View with LCD Panel Open LED Power, Battery & E-Mail Status Indicators Built-In Microphone Hot-Key Buttons LED Status Indicators Power Button Close Cover Switch Keyboard TouchPad and Buttons 10.

  • Page 27: Lcd Panel

    Introduction LCD Panel The computer comes with a TFT LCD (Liquid Crystal Display) screen, (see “LCD” on page A - 1 for details (Note: The system will decrease LCD bright- ness slightly to save power when it is not powered by the AC adapter). LED Power, Battery &...

  • Page 28: Power Button

    Introduction Power Button Press this button to turn your computer on or off (see “Turning on the Com- puter” on page 2 - 4). This button may also be used as a suspend/resume key, once configured as such in the power management control panel of your op- erating system (see “Configuring the Power Button”...

  • Page 29: Close Cover Switch

    Introduction Close Cover Switch This switch acts as a sensor to tell when the LCD panel is closed. When this LCD cover sensor is activated the default setting of your operating system’s power scheme sends the computer into a power saving state (“When I close the lid of my portable computer:”...

  • Page 30: Front View

    Introduction Front View Figure 1 - 4 Front View LCD Latch Audio “DJ” CD Player Control Panel On/Off Switch Previous Track Next Track Play/Pause Stop Volume Down Audio “DJ” CD Player Volume Up 10. Speakers The built-in standalone audio CD player gives you direct hardware control for audio CDs when the computer is shut down, but has a working power source.

  • Page 31: Stereo Speakers

    Introduction Note: If you are playing a CD in the audio player and you use the power button to switch the computer on, the audio player will switch off. Sound Volume Adjustment How high the sound volume can be set using the volume control knob depends on the setting of the volume control within Windows.

  • Page 32: Left Side View

    Introduction Left Side View Figure 1 - 5 Left Side View S/PDIF Out Port/ 2 3 4 Microphone-In Jack Line-In Jack Headphone-Out Jack Infrared Transceiver PC Card Slot Eject Buttons PC Card Slot Floppy Disk Drive 1st Modular Drive Bay (Bay One) 2nd Modular Drive Bay (Bay Two) 10.

  • Page 33: S/Pdif Out Port/Microphone-In Jack

    Introduction S/PDIF Out Port/Microphone-In Jack You can use this port for S/PDIF (Sony/Philips Digital Interface Format) out- put, and to record on your notebook computer with an external microphone. The S/PDIF Out Port allows you to connect your DVD-capable PC to a Dolby AC-3 compatible receiver for “5.1”...

  • Page 34: Infrared Transceiver

    Introduction Infrared Transceiver The infrared transceiver enables communication between the computer and another similarly equipped device, and is 4M bps FIR, IrDA 1.1 compliant. Infrared For further information please refer to the manual of the device you wish to Communication connect (see “Configuring the Infrared Settings for FIR”...

  • Page 35: Fdd (Floppy Disk Drive)

    Introduction 3.5" FDD (Floppy Disk Drive) This is a 3.5", 1.44 MB fixed floppy disk drive. For more information please refer to “The Floppy Disk Drive (FDD)” on page 2 - Media Warning Don’t try to remove a Modular Drive Bays floppy disk while the There are two device bays (1st Modular Drive Bay - Bay One and 2nd Mod- system is accessing it.

  • Page 36: Hard Disk Drive

    Introduction Hard Disk Drive The hard disk drive is used to store your data. You can have up to three hard disks in your computer depending on the configuration options purchased. Drive Warning You may have one primary HDD, one optional HDD in the 1st modular Don’t try to remove the drive bay (Bay One), and one optional HDD in the 3rd modular drive bay hard disk (HDD) while...

  • Page 37: Ip Sharing Module

    Introduction IP Sharing Module The optional IP sharing module allows you to share your xDSL or cable mo- dem internet connection with up to 4 other computers. You can also share files and printer connections with other machines connected to the ports (see “IP Sharing Module”...

  • Page 38: Right Side View

    Introduction Right Side View Figure 1 - 6 Right Side View 4th Modular Drive Bay (Bay Four) for MP3 Player (Optional) or 6-in-1 Flash Card Reader (Optional) Bay Four Release MP3 Player Switch Fan Intake The optional, portable, MP3 player allows you to play MP3 music files, and Security Lock Slot includes a Secure Digital card (SD)/MultiMedia Card (MMC) slot for data storage (see...

  • Page 39: 6-In-1 Flash Card Reader (Optional)

    Introduction 6-in-1 Flash Card Reader (Optional) The card reader allows you to use the most popular digital storage cards. The formats which can be read include: Software Installation • MMC (MultiMedia Card) Warning • SD (Secure Digital) Make sure the 6-in-1 •...

  • Page 40: Rear View

    Introduction Rear View Figure 1 - 7 Rear View DC-In Jack 4 * USB Ports S-Video-In Port (Optional with TV- 10 11 12 Tuner) S-Video-Out Port DVI-Out Monitor (CRT) Port Coaxial TV Antenna Input USB 2.0 Support in Windows XP & Windows 2000 (Optional) Serial/Com Port Make sure you install Windows XP Service Pack 1 (or a Windows XP version...

  • Page 41: Dc-In Jack

    Introduction DC-In Jack Plug the supplied AC adapter into this jack to power your notebook. Four USB Ports Depending on the model you purchase, the USB ports which come with your notebook can be either USB 1.1 compatible or USB 2.0 compatible. USB 1.1 is for low-speed peripherals such as keyboards, mice or scanners while USB 2.0 is for high-speed peripherals such as external HDDs, digital video cameras or high-speed scanners and all USB 1.1 compliant devices.

  • Page 42: S-Video-Out Port

    Introduction S-Video-Out Port Connect your television to your computer and view DVDs, VCDs or anything else your computer can display. You will need an S-Video cable to make the connection. Enable this port from the video driver controls (see “Enabling TV Display”...

  • Page 43: Coaxial Tv Antenna Input

    Introduction Coaxial TV Antenna Input If you have purchased the optional TV Tuner module with your notebook computer, the 75 Ohm Coaxial TV Antenna Input will allow you to connect your cable TV/TV antenna to watch television, and capture still images on TV Remote your PC.

  • Page 44: Printer/Parallel Port

    Introduction Printer/Parallel Port This port supports ECP (Extended Capabilities Port) and EPP (Enhanced Par- allel Port) 1.7/1.9 modes. PS/2 Type Port Connect an external PS/2 type mouse or keyboard to this port. You can use a “Y” splitter if you want to attach both. Giga LAN Jack This port supports LAN (Network) functions.

  • Page 45: Bottom View

    Introduction Bottom View Figure 1 - 8 Bottom View Vent/Fan Intake CPU Cover Overheating Battery Primary Hard Disk To prevent your computer from 3rd Modular Drive overheating make sure nothing Bay (Bay Three) blocks the vent/fan intakes while the computer is in use. Vent/Fan Intake The CPU is not a user serviceable...

  • Page 46: Primary Hard Disk

    Introduction Primary Hard Disk The hard disk drive is used to store your data (see “Hard Disk Drive” on page 1 - 16 for more information). 3rd Modular Drive Bay (Bay Three) The 3rd Modular drive Bay may contain either the optional TV Tuner device (see “TV Tuner”...

  • Page 47: Usb Wireless Lan (Network) And Bluetooth Modules

    Introduction USB Wireless LAN (Network) and Bluetooth Modules Your notebook computer may have an optional USB Wireless Network module and/or Bluetooth module(s). If included, the antenna and other com- Wireless Device ponents are not externally visible (please check with your service representa- Operation Aboard tive).
  • Page 48 Introduction 1 - 28...

  • Page 49: Using The Computer

    Using The Computer Chapter 2: Using The Computer Overview To learn more about using your computer, please read this chapter. This chapter includes: • The Power Sources • Turning on the Computer • LED Indicators • Auto Mail Checker • The Hard Disk Drive •...

  • Page 50: The Power Sources

    Using The Computer The Power Sources The computer can be powered by either an AC adapter or a battery pack. Shutdown AC Adapter Please note that you Use only the AC adapter that comes with your computer. The wrong type of should always shut...

  • Page 51: Battery

    Using The Computer Battery The battery allows you to use your notebook computer while you are on the road or an electrical outlet is unavailable. Battery life varies depending on the applications and the configuration you're using. To increase battery life, let the battery discharge completely before recharging.

  • Page 52: Turning On The Computer

    Using The Computer Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the power button on the front panel. Power Button as Standby or Hibernate Button When the computer is on, you can use the power button as a hot-key button when it is pressed for less than 4 seconds.

  • Page 53: Led Indicators

    Using The Computer LED Indicators There are two sets of LED indicators (LED Power, Battery & E-Mail Status Indicators and LED Status Indicators) on your computer that will display helpful information about the current status of the computer. Figure 2 - 2 LED Power, Battery &...

  • Page 54: Led Power, Battery & E-Mail Status Indicators

    Using The Computer LED Power, Battery & E-Mail Status Indicators Icon Color Description Low Battery Warning Green The computer is on When the battery is critically low, immedi- Blinking Green The computer is in suspend mode ately connect the AC adapter to the comput- Orange The battery is being charged...

  • Page 55: Led Status Indicators

    Using The Computer LED Status Indicators Once your computer is on and in use, the LED status indicators will display the system's operational status. Scroll Lock To enable and disable the Scroll Lock feature, press ScrLk keys simultane- Icon Color Description ously.

  • Page 56: Auto Mail Checker

    Using The Computer Auto Mail Checker “What to After you have installed the driver for the Auto Mail program (see Install” on page 4 - 1 ) you may then configure it to give you notification when you receive new mail. You must be online to receive this notification (note that this program only supports the POP3 protocol), and your default mail program does not need to be open.
  • Page 57 Using The Computer You may then configure the options for your mailserver, name, password, pro- gram and method(s) of notification. Note Check with your Inter- net Service Provider, network administrator or Mail Service provid- er for details on what to put on these pages.

  • Page 58: Special Group

    Using The Computer Special Group You may add the e-mail addresses of those you wish to assign to your special group here. The Mail LED will then blink fast when mail is received from members of this group, if LED notification is enabled in the control panel (Figure 2 - Figure 2 - 6 Special Group Setup...

  • Page 59: The Hard Disk Drive

    Using The Computer The Hard Disk Drive The hard disk drive is used to store your data in the computer. The Primary hard disk is mounted in a removable case and can be taken out to accommo- Power Safety date other 2.5" IDE hard disk drives with a height of 9.5 mm. You may have Before attempting to a second, and third hard disk depending on the configuration purchased (see access any of the inter-...

  • Page 60: The Floppy Disk Drive (Fdd)

    Using The Computer The Floppy Disk Drive (FDD) The computer is equipped with a fixed 1.44 MB, 3.5" floppy disk drive mod- ule. By default it is drive “A:” and can be used as a boot device if properly set Media Warning in the BIOS (refer to “Boot Menu”...

  • Page 61: The Cd/Dvd Device

    Using The Computer The CD/DVD Device There are two bays for a combination of a CD-ROM, or DVD-ROM, or CD- RW, or Combination CD-RW and DVD-ROM drive, or DVD-R/-RW drive, Sound Volume depending on your purchase options. You may alternatively have a hard disk/ Adjustment RAID or IP sharing module in the 1st Modular Drive Bay (Bay One).

  • Page 62: Handling Cds Or Dvds

    Using The Computer Handling CDs or DVDs Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CD- Media Warning ROMs/DVD-ROMs can be accessed. When manually eject- Remember to: ing a CD/DVD, DO NOT use a sharpened...

  • Page 63: Dvd Regional Codes

    Using The Computer DVD Regional Codes DVD region detection is device dependent, not OS-dependent. You can select your module’s region code 5 times. The fifth selection is permanent. This can- not be altered even if you change your operating system or you use the module in another computer.

  • Page 64: Changing Dvd Regional Codes

    Using The Computer Changing DVD Regional Codes Go to the Control Panel in WindowsXP/Windows 2000 and double-click Sys- tem > Hardware (tab), click Device Manager, then click the + next to DVD/ CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties menu, and select the DVD Region (tab) to bring up the control panel as seen in “DVD Regional Codes (Windows XP)”...

  • Page 65: The Pc Card Slot

    Using The Computer The PC Card Slot The computer is equipped with a PCMCIA 3.3V/5V slot for two Type II PC Cards, or one Type III PC Card. Type III PC Cards only fit into the lower socket. Inserting and Removing PC Cards •...

  • Page 66: Hot-Key Buttons

    Using The Computer Hot-Key Buttons These keys access the internet, e-mail or a user-defined application with one quick button press. To use the “user-defined Hot-Key”, you must install the “What to Install” Hot-Key driver. After installing the Hot-Key driver (see on page 4 - 1 ), you may have to configure or change the settings.
  • Page 67 Using The Computer To configure and specify an application for Application 1 (the default Hot- Key setting is for the CD Player/Media Player application), you must follow the instructions below. Application.exe Right click the Hot-Key driver icon on the taskbar and the following You will need to locate menu will appear.

  • Page 68: The Function Keys And Numeric Keypad

    Using The Computer The Function Keys and Numeric Keypad Function Keys Other Keyboards On the bottom-left of the keyboard is the Fn key or Function key. The Fn key allows you to change operational features instantly. To use the following func- If your keyboard is tions press and hold the Fn key, then press the appropriate function key (Esc, damaged or you just...

  • Page 69: Numeric Keypad

    Using The Computer Numeric Keypad The keyboard has a numerical keypad for easy numeric data input (see “The Function Keys and Numeric Keypad” on page 2 - 20). Special Characters Activate the Number Lock feature by pressing the NumLk key at the top Some software appli- right of the keyboard.

  • Page 70: Touchpad And Buttons/Mouse

    Using The Computer TouchPad and Buttons/Mouse The pointing device features a sensitive glide pad for precise movements. It functions the same way as a two-button mouse (the central Rocker Switch Mouse Driver may be configured to function as a “third” button if you prefer). The right If you are using an ex- TouchPad button is the same as the right mouse button;...

  • Page 71: Adding A Printer

    Using The Computer Adding a Printer The most commonly used peripheral is a printer. The following conventions will help you to add a printer, however it is always best to refer to the printer manual for specific instructions and configuration options. USB Printer Most new printers have a USB interface connection.

  • Page 72: Parallel Printer

    Using The Computer Parallel Printer This is still the most common type of printer. Install Instructions: Set up the printer according to its instructions (unpacking, paper tray, toner/ ink cartridge etc.). Attach the parallel cable to the printer. Connect the printer’s parallel cable to the parallel port at the rear of the computer (see “Rear View”...

  • Page 73: Advanced Controls

    Advanced Controls Chapter 3: Advanced Controls Overview This chapter covers: Drivers • Advanced Video Controls • Power and Battery Management Features You are unable to use most advanced con- • The Audio "DJ" CD Player trols until the neces- • Audio Setup for Virtual 6-Channel sary drivers •...

  • Page 74: Advanced Video Controls

    Advanced Controls Advanced Video Controls This section is about making adjustments for the LCD, and switching display devices. Protecting the LCD Do not allow any for- Opening the LCD eign objects (i.e. paper As you open the lid, adjust it so you can look at the screen straight on, without or plastic) to get be- tween the lid/LCD and any glare.

  • Page 75: Video Driver Controls

    Advanced Controls Video Driver Controls The video interface lets you change the screen resolution and color output to whatever is most comfortable/efficient for you. This is a matter of hardware, Screenshots video memory and the driver for your operating system. The driver interface All screenshots in this shows the available options (see “LCD”...

  • Page 76: Making Adjustments For The Display

    Advanced Controls Making Adjustments for the Display The higher the resolution you set the LCD for, the more information the LCD can display on screen. To change the LCD’s resolution and color depth go to Screen Resolution/ the Display Properties control panel: Area Note Click Start, point to Settings and click Control Panel.
  • Page 77 Advanced Controls Figure 3 - 3 Advanced Display Properties Mobility M10 Properties You can also access Mobility M10 Proper- ties by right-clicking the ATI icon in the taskbar. Point to Set- tings and click Dis- Open the Display Properties control panel, and click the Advanced (but- play Settings, then ton) to bring up the Mobility M10 Properties tabs.
  • Page 78 Advanced Controls Figure 3 - 4 Mobility M10 Properties Option Tabs Help Menu Help Menus Right-click on almost any item in the tabs to bring up the “What’s This?” button. Click “What’s This?” button to bring up the help menu. 3 - 6 Video Driver Controls...
  • Page 79 Advanced Controls Access the menus from ATI taskbar to get further help on display options, TV options etc. Right-click the ATI icon in the taskbar and point to Help or Troubleshooting (Figure 3 - 5). You can also switch between the displays and go to the Mobility M10 Properties.

  • Page 80: Display Devices

    Advanced Controls Display Devices Besides the built-in LCD, you can also use an external CRT connected to the external monitor (CRT) port, a Flat Panel Display, or TV as your display de- Drivers vice. The following are the display options: You are unable to use most advanced con- The built-in LCD.

  • Page 81: Display Options

    Advanced Controls Display Options Table 3 - 1 Display Mode Windows XP Windows 2000 Display Options Single Multiple - Clone Mode Multiple - Extended Not Available Desktop Mode Single - Either the LCD, Monitor, Flat Panel Display or TV as a display device. Multiple (Clone) - The LCD, Monitor, Flat Panel Display or TV outputting the same view (you can apply different display modes with different resolutions and refresh rates).

  • Page 82: Attaching A Monitor (Crt)

    Advanced Controls Attaching a Monitor (CRT) If you prefer to use a monitor (CRT) or Flat panel Display, connect it to the External Monitor (CRT) port on the rear panel (see “Rear View” on page 1 - Function Key 20). You may need to use a DVI to VGA converter. Combination You can use the FN + F6 key combination to...

  • Page 83: Enabling Other Displays

    Advanced Controls Enabling Other Displays Other displays are enabled from Display in the Advanced Mobility M10 Properties Window (Figure 3 - Primary & Clone Displays Attach your external monitor to the External Monitor (CRT) port (or TV to the S-Video Out port), and turn it on. The Primary display in Go to the Advanced Display Settings (see Figure 3 - 3 on page...

  • Page 84: Clone Mode

    Advanced Controls Clone Mode Clone Mode simply shows an exact copy of the Primary display desktop on the other display(s). This mode will drive multiple displays with the same con- Display Data Channel tent. Use this feature to display the screen through a projector for a presenta- Information tion.

  • Page 85: Extended Desktop Mode

    Advanced Controls Extended Desktop Mode The system supports Extended Desktop (the LCD and a CRT showing differ- ent views) in multiple display environments in WindowsXP, but this mode is NOT supported in Windows2000 . An Extended Desktop creates a desktop spanning multiple displays and acts as a large workspace.
  • Page 86 Advanced Controls 11. In the example shown in Figure 3 - 9 the primary monitor is on the left, the other display is on the right. Click either the Display pop-up menu, or click the icon for the appro- Figure 3 - 9 priate display.
  • Page 87 Advanced Controls 13. One display will be set to 1 (Primary), and the other to 2 (Clone). The displays may be switched as long as one as set to Primary. Figure 3 - 10 Displays Tab (Extended Desktop Mode) 14. To switch from Extended Desktop mode back to Clone mode, first uncheck the tick box to disable the Extended Desktop (via the settings tab in the “Extended Display Properties control panel) and click Apply (see...

  • Page 88: Enabling Tv Display

    Advanced Controls Enabling TV Display To display desktop images on a TV display, connect the TV to your computer by using an S-Video cable from the TV to the connector at the rear of the com- TV Format puter (see “Rear View”...

  • Page 89: Power Management Features

    Advanced Controls Power Management Features To conserve power, especially when using the battery, your notebook comput- er has two types of power management available, ACPI and APM. Power OS Note management conserves power by controlling individual components of the Power management computer (the monitor and hard disk drive) or the whole system.

  • Page 90: Enabling Power Options

    Advanced Controls Enabling Power Options Power Options are enabled through the Control Panel in your Windows sys- tem (Power Options). With other operating systems you may have power management available, so check your documentation. Figure 3 - 12 Power Options Control Panel You may conserve power through individual components or throughout the whole system.

  • Page 91: Conserving Power Through Individual Components

    Advanced Controls Conserving Power Through Individual Components Monitor Standby Resuming Operation To conserve power, you can set the monitor to turn off after a specified time. The system can re- sume from Monitor or Hard Disk Standby Hard Disk Standby by The computer's hard disk motor will be turned off if the hard disk drive has pressing a key on the keyboard.

  • Page 92: Conserving Power Throughout The System

    Advanced Controls Conserving Power Throughout the System With this function you can stop the notebook’s operation and restart where you left off. This system features Standby and Hibernate suspend mode lev- System Suspend els (Hibernate mode will need to be enabled by clicking the option in the Hi- Mode &...

  • Page 93: Standby

    Advanced Controls Standby Standby saves the least amount of power, but takes the shortest time to return to full operation. During Standby the hard disk is turned off, and the CPU is System Resume made to idle at its slowest speed. All open applications are retained in memo- system ry.

  • Page 94: Configuring The Power Button

    Advanced Controls Configuring the Power Button The power button may be set to send the computer in to either Standby or Hi- bernate modes (Figure 3 - 15). If you are running on battery power, in Stand- Suspend/Resume by mode the LED will flash green, in Hibernate mode the LED will Button be off.

  • Page 95: Battery Information

    Advanced Controls Battery Information Please follow these simple guidelines to get the best use out of your battery. Caution New Battery Danger of explosion if Always completely discharge, then fully charge, a new battery before using it battery is incorrectly (see “Battery FAQ”...

  • Page 96: Battery Faq

    Advanced Controls Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Conserving Battery Don’t turn off the computer by yourself even when you see a message that in- Power dicates the battery is critically low, just let the computer use up all of the bat- To conserve battery...

  • Page 97: Audio "Dj" Cd Player

    Advanced Controls Audio “DJ” CD Player The built-in standalone audio CD player gives you direct hardware control for audio CDs when the computer is shut down, but has a working power source. Turning the Computer On Make sure that the computer is shut down (i.e. the operating system is not Note: If you are play- running) but you have a working power source (either running from the bat- ing a CD in the audio...

  • Page 98: Audio "Dj" Cd Player Controls (Power On)

    Advanced Controls Audio “DJ” CD Player Controls (Power On) CD Player Control Panel On/Off Switch When the computer is powered-on the Audio “DJ” Player controls will allow you to control over various media players in Windows. The actual functions Previous Track available will depend on the application used.
  • Page 99 Advanced Controls InterVideo WinDVD Power DVD Player Windows System Volume Up Windows System Volume Up Sound Volume Adjustment Windows System Volume Down Windows System Volume Down How high the sound volume can be set us- Play/Pause Play/Pause ing the volume control knob depends on the Stop Stop...

  • Page 100: Audio Setup For Virtual 6-Channel Mode

    Advanced Controls Audio Setup for Virtual 6-Channel Mode To setup the computer’s audio system in Virtual 6-Channel mode, follow the instructions below. Sound Volume Adjustment Windows XP Audio Setup: Go to the Start menu and point to Settings and click Control Panel, then The table below indi- double-click the Sounds &...

  • Page 101: Configuring The Infrared Settings For Fir

    Advanced Controls Configuring the Infrared Settings for FIR You will need to change the settings for the infrared device in the BIOS (see “I/O Device Configuration (Advanced Menu)” on page 5 - 10) to enable the Infrared FIR setting support. Communication The infrared transceiv- To configure your computer for Fast Infrared (FIR) communication follow...
  • Page 102 Advanced Controls 3 - 30...

  • Page 103: Drivers & Utilities

    Drivers & Utilities Chapter 4: Drivers & Utilities Overview What to Install The Device Drivers & Utilities + User’s Manual This chapter deals with installing the drivers and CD-ROM contains the drivers and utilities neces- utilities essential to the operation or improvement sary for the proper operation of the computer (ex- of some of the computer’s subsystems.

  • Page 104: Authorized Driver Message

    Drivers & Utilities Authorized Driver Message If you receive a message telling you that the driver you are installing is not authorized (Digital Signa- Navigate (Browse..) to D: ture Not Found), just click Yes or Continue Any- way to ignore the message and continue the You will notice that many of the instructions for driv- installation procedure.

  • Page 105: Version Conflict Message

    Drivers & Utilities Version Conflict Message RAID Driver Installation During driver installation if you encounter any “file If your purchase includes the optional RAID con- version conflict” message, please click Yes to figuration you need to install the RAID driver. Fol- choose to keep the existing (newer) version.
  • Page 106 Drivers & Utilities Table 4 - 1 - Installation Order Feature Windows 2000 Win XP RAID “RAID Configuration” on page 7 - 23 Chipset page 4 - 5 page 4 - 9 Audio page 4 - 5 page 4 - 9 Modem page 4 - 6 page 4 - 10...

  • Page 107: Windows 2000 Professional

    Drivers & Utilities Windows 2000 Professional This section covers driver and utility installation in- Audio (Win2000) structions for Windows 2000 Professional. 1. Click Start (menu) > Run ... 2. Navigate (Browse..) to D:\Drivers\AUDIO\Setup.exe and click OK. 3. Click Next. 4. Click Finish to restart the computer. Windows 2000 Service Pack 4 5.

  • Page 108: Modem (Win2000)

    Drivers & Utilities Modem (Win2000) LAN (Win2000) 1. Click Start (menu) > Run ... 1. Click Start (menu) > Run ... 2. Navigate (Browse..) to 2. Navigate (Browse..) to D:\Drivers\MODEM\WIN2000\Setup.exe D:\Drivers\Lan\Setup.exe and click OK. and click OK. 3. Click Next. 3.

  • Page 109: Hot-Key (Win2000)

    Drivers & Utilities Hot-Key (Win2000) AutoMail (Win2000) 1. Click Start (menu) > Run ... 1. Click Start (menu) > Run ... 2. Navigate (Browse..) to D:\Drivers\AP- 2. Navigate (Browse..) to KEY\Setup.exe and click OK. D:\Drivers\AUTOMAIL\SETUP.EXE and 3. Choose the language you prefer and click OK. click OK.

  • Page 110: Pc Card/Pcmcia (Win2000)

    Drivers & Utilities PC Card/PCMCIA (Win2000) 1. Click Start (menu), point to Settings and click Control Panel. Double-click System (icon) and then click Device Manager (tab). 2. Click “+” next to PCMCIA (if its sub-items are not shown). 3. Double-click either of the two Generic CardBus Controller items, and click the Driver (tab).

  • Page 111: Windows Xp

    Drivers & Utilities Windows XP Audio (WinXP) 1. Click Start (menu) > Run ... This section covers driver and utility installation in- 2. Navigate (Browse..) to structions for Windows XP. D:\Drivers\AUDIO\Setup.exe and click OK > Next. 3. Click Finish to restart the computer. 4.

  • Page 112: Modem (Winxp)

    Drivers & Utilities Modem (WinXP) Video (WinXP) 1. Click Start (menu) > Run ... 1. Click Start (menu) > Run ... 2. Navigate (Browse..) to 2. Navigate (Browse..) to D:\Drivers\MODEM\WINXP\Setup.exe and D:\Drivers\VIDEO\Setup.exe and click OK. click OK. 3. To continue click Next > Yes > Express. 3.

  • Page 113: Touchpad (Winxp)

    Drivers & Utilities TouchPad (WinXP) AutoMail (WinXP) 1. Click Start (menu) > Run ... 1. Click Start (menu) > Run ... 2. Navigate (Browse..) to 2. Navigate (Browse..) to D:\Drivers\TOUCHPAD\WINXP\Setup.exe D:\Drivers\AUTOMAIL\SETUP.EXE and and click OK. click OK. 3. To continue click Next > Next > Next (click 3.
  • Page 114 Drivers & Utilities 4 - 12...

  • Page 115: Bios Utilities

    BIOS Utilities Chapter 5: BIOS Utilities Overview BIOS Settings Warning This chapter gives a brief introduction to the computer’s built-in software: Incorrect settings can cause your system to Diagnostics: The POST (Power-On Self Test) malfunction. To correct mistakes, return Configuration: The Setup utility Setup and restore the If your computer has never been set up, or you are making important changes Setup Defaults with...

  • Page 116: Important Bios Settings

    BIOS Utilities Important BIOS Settings Generally speaking you should not have to adjust any of the BIOS settings, as they will already be set for your computer. However the following is a quick reference to the most important settings you may need to change at some point.

  • Page 117: The Power-On Self Test (Post)

    BIOS Utilities The Power-On Self Test (POST) Each time you turn on the computer, the system takes a few seconds to con- duct a POST, including a quick test of the on-board RAM (memory). POST Screen 1.BIOS information As the POST proceeds, the computer will tell you if there is anything wrong. 2.CPU type If there is a problem that prevents the system from booting, it will display a 3.Memory status...

  • Page 118: Failing The Post

    BIOS Utilities Failing the POST Errors can be detected during the POST. There are two categories, “fatal” and “non-fatal”. Fatal Errors These stop the boot process and usually indicate there is something seriously wrong with your system. Take the computer to your service representative or authorized service center as soon as possible.

  • Page 119: The Setup Program

    BIOS Utilities The Setup Program The Phoenix Setup program tells the system how to configure itself and man- age basic features and subsystems (e.g. port configuration). Entering Setup To enter Setup, turn on the computer and press F2 during the POST. The prompt (“Press F2 to Enter Setup”) seen in Figure 5 - 1 is usually present...

  • Page 120: Setup Screens

    BIOS Utilities Setup Screens The following pages contain additional advice on portions of the Setup. Setup Menus Along the top of the screen is a menu bar with five (5) menu headings. When Setup menus you select a heading, a new screen appears. Scroll through the features listed shown in this section on each screen to make changes to Setup.

  • Page 121: Main Menu

    BIOS Utilities Main Menu Figure 5 - 2 Main Menu PhoenixBIOS Setup Utility Main Main Advanced Security Boot Exit Item Specific Help System Time: [14:11:05] System Date: [06/23/2003] <Tab>, <Shift Tab>, or Legacy Diskette A: [1.44 MB 3½"] <Enter> selects field. Primary Master [None] Secondary Master...
  • Page 122 BIOS Utilities Primary Master (Main Menu) Pressing Enter under opens the sub-menu to show the configuration of the HDD that fits into the computer’s HDD bay. These items are configured au- Switching Hard Disks tomatically for you. Every time you install a Secondary Master (Main Menu) different hard disk in the computer, it will be...

  • Page 123: Advanced Menu

    BIOS Utilities Advanced Menu Figure 5 - 3 Advanced Menu PhoenixBIOS Setup Utility Main Advanced Advanced Security Boot Exit Item Specific Help Setup Warning Setting itmes on this menu to incorrect values may cause your system to malfunction. Select 'Yes' if you want to clear the Reset Configuration Data [WNo]...
  • Page 124 BIOS Utilities I/O Device Configuration (Advanced Menu) The sub-menus under this item include options to configure the Serial port A (Serial Mouse), Serial port B (Infrared) and Parallel (Printer) port. These can be left to the default settings, however you may wish to use certain devices that require settings to be adjusted accordingly.
  • Page 125 BIOS Utilities CPU clock adjust: (Advanced Menu) If you choose “Enabled” the CPU clock will save power if you are not using the AC adapter in order to increase the battery life. Battery Low Beep Warning (Advanced Menu) Use this setting to enable/disable the warning beep when the battery reaches a low power level.

  • Page 126: Security Menu

    BIOS Utilities Security Menu Figure 5 - 4 Security Menu PhoenixBIOS Setup Utility Main Advanced Security Security Boot Exit Item Specific Help Supervisor Password Is: Clear User Password Is: Clear Supervisor Password Set Supervisor Password [E E nter] controls access to the Set User Password: [Normal] setup utility.

  • Page 127: Boot Menu

    BIOS Utilities Boot Menu Figure 5 - 5 PhoenixBIOS Setup Utility Boot Menu Boot Boot Main Advanced Security Exit Item Specific Help Removable Devices Keys used to view or CD-ROM Drive configure devices: <Enter> expands or Hard Drive collapses devices with Network Boot a + or - <Ctrl+Enter>...
  • Page 128 BIOS Utilities Boot devices usually are hard drives, floppy drives, CD-ROMs and LANs (Local Area Networks). When you specify a device as a boot device on the Boot Menu, it requires the availability of an operating system on that device. Most home computers come with an operating system already installed on “Drive C:”.

  • Page 129: Exit Menu

    BIOS Utilities Exit Menu Figure 5 - 6 PhoenixBIOS Setup Utility Exit Menu Exit Main Advanced Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Exit System Setup and Load Setup Defaults save your changes to CMOS. Discard Changes Save Changes Help...
  • Page 130 BIOS Utilities 5 - 16...

  • Page 131: Upgrading The Computer

    Upgrading The Computer Chapter 6: Upgrading The Computer Overview This chapter contains the information on upgrading the computer. Follow the steps outlined to make the desired upgrades. If you have any trouble or prob- lems you can contact your service representative for further help. Before you begin you will need: •...

  • Page 132: When Not To Upgrade

    Upgrading The Computer When Not to Upgrade These procedures involve opening the system’s case, adding and sometimes replacing parts. Power Safety Warning You should not perform any of these upgrades if: Before you undertake any upgrade proce- • your system is still under warranty or a service contract dures, make sure that •...

  • Page 133: Battery Removal

    Upgrading The Computer Battery Removal It is recommended that you do not remove your battery, however when up- grading your computer it is recommended you remove the battery for safety purposes. Shut the computer down and turn it over. Remove screws Figure 6 - Apply gentle pressure at point to push the battery up and out of the...

  • Page 134: Upgrading The 1St Modular Drive Bay (Bay One) Cd Device

    Upgrading The Computer Upgrading the 1st Modular Drive Bay (Bay One) CD Device The interchangeable CD device installed in the 1st Modular Drive Bay (Bay One) will depend on what configuration you purchased. If you wish to change or upgrade this device follow this procedure. Turn the computer OFF.
  • Page 135 Upgrading The Computer Remove the screw at position , and push the device out from the area indicated by the arrow. Figure 6 - 3 1st Modular Drive Bay (Bay One) Device Removal Upgrading the 1st Modular Drive Bay (Bay One) CD Device 6 - 5...

  • Page 136: Upgrading The 2Nd Modular Drive Bay (Bay Two) Device

    Upgrading The Computer Upgrading the 2nd Modular Drive Bay (Bay Two) Device What is installed in the 2nd Modular Drive Bay (Bay Two) will depend on what configuration you purchased. If you wish to change or upgrade this de- vice follow the same procedure as “Upgrading the 1st Modular Drive Bay (Bay One) CD Device”...

  • Page 137: Upgrading The Primary Hard Disk

    Upgrading The Computer Upgrading the Primary Hard Disk The hard disk drive is used to store your data internally in the computer. The primary hard disk is mounted in a removable case under battery bay, and can be taken out to accommodate other 2.5" IDE hard disk drives with a height of 9.5 mm.
  • Page 138 Upgrading The Computer Remove the battery (see “Battery Removal” on page 6 - Remove screws from the HDD assembly. Release the HDD connector cable Remove the HDD assembly from the bay. HDD Cables The illustrated HDD cable may differ from the one in your model depending on the con- figuration purchased.
  • Page 139 Upgrading The Computer Take the HDD assembly out of the case, and remove the HDD connector cable Reconnect the HDD connector cable. Just reverse the removal procedure to install the new HDD assembly (make sure you reconnect the cable before replacing the screws Figure Figure 6 - 6 Removing the HDD...

  • Page 140: Upgrading The Hard Disk In The 3Rd Modular Drive (Bay Three)

    Upgrading The Computer Upgrading the Hard Disk in the 3rd Modular Drive (Bay Three) The drive bay under the computer can be used to house either the optional TV tuner, or an optional hard disk drive. To upgrade the hard disk in the changeable drive bay please perform the fol- lowing steps: Turn the computer OFF.
  • Page 141 Upgrading The Computer Lift the cover off the changeable drive bay and set it aside. Remove screws Lift the HDD assembly out of the bay. Figure 6 - 8 HDD Assembly Removal Upgrading the Hard Disk in the 3rd Modular Drive (Bay Three) 6 - 11...
  • Page 142 Upgrading The Computer Remove screws and the connector , to release the HDD from the case. Insert the new hard disk and reverse the procedures to install it. Figure 6 - 9 HDD Case Screws & Connector Cable 6 - 12 Upgrading the Hard Disk in the 3rd Modular Drive (Bay Three)

  • Page 143: Some Things To Watch Out For

    Upgrading The Computer Some Things to Watch Out For Software HDD System Allow the system to auto-detect the new HDD, or if necessary, run the Setup Warning Utility in the BIOS to customize the system (see “Primary Master (Main New HDDs are blank. Menu)”...

  • Page 144: Upgrading The System Memory

    Upgrading The Computer Upgrading the System Memory The computer has two memory sockets for 200-pin 400MHz or 333MHz DDR Small Outline Dual In-line Memory Modules (SO-DIMM). If you are using 333MHz DDR modules the main memory can be expanded up to 2GB, and accepts 256/512/1024 MB modules. If you are using 400MHz DDR modules the main memory can be expanded up to 1GB, and accepts 256/512 MB modules.

  • Page 145: Removing The System Memory

    Upgrading The Computer Removing the System Memory Turn off the computer. Press the two keyboard latches at the top of the keyboard to elevate the keyboard from its normal position as in Figure 6 - 10 (you may need to use a small screwdriver to do this).
  • Page 146 Upgrading The Computer Carefully loosen the locking collar on the keyboard cable by using a small flat-head screwdriver to gently pry the locking collar away from its base (when replacing the connection, make sure the connector is oriented in the same way).
  • Page 147 Upgrading The Computer Locate the Memory sockets Contact Warning Be careful not to touch the metal pins on the module’s connecting edge Even the clean- est hands have oils which can attract parti- cles, and degrade the module’s perfor- mance. Figure 6 - 12 If there is a module currently installed which needs to be upgraded/replaced then remove it.
  • Page 148 Upgrading The Computer 11. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot. Figure 6 - 13 Memory Insertion 12. The module will only fit one way as defined by its pin alignment. Make sure the module is seated as far into the slot as it will go.
  • Page 149 Upgrading The Computer 15. Reconnect the keyboard ribbon cable and carefully tighten the locking collar, insuring that the cable will not come free. 16. Replace the keyboard by insuring the five tabs at the base of the keyboard fit into place (you will find these under the Fn, Spacebar (2), arrow and Enter keys - see Figure 6 - 14).

  • Page 150: Upgrading The Processor

    Upgrading The Computer Upgrading the Processor If you want to upgrade your computer by replacing the existing processor with a faster/new one you will need to contact your customer service representa- Warranty tive. We recommend that you do not do this yourself, since if it is done incor- The CPU is not a user rectly you may damage the processor or mainboard.

  • Page 151: Options

    Options Chapter 7: Options Overview This chapter contains the information on the various optional items which may come with your computer, depending on the configuration purchased. If you are unsure please contact your service representative. The chapter includes information on the following: •...

  • Page 152: The Mp3 Player

    Options The MP3 Player Figure 7 - 1 Right Side - MP3 The optional MP3 Mobile SD/MMC music player allows you to play and store Player In & Out MP3 music files, and store other data file types. The MP3 player (powered by two AAA batteries) has a built-in port for SD (Secure Digital)/MultiMedia MP3 Player Slot Card (MMC) flash memory cards, a mini USB port (USB cable not supplied)

  • Page 153: Inserting The Mp3 Player

    Options Inserting the MP3 Player Push the MP3 player into the slot on the right side of the computer. The player should be inserted with the control panels facing upwards as indicated in Fig- ure 7 - 2. Windows will recognize the drive as a removable disk and assign it a letter according to the number of other drives you have in your computer.

  • Page 154: Secure Digital Cards/Multimedia Cards

    Options Secure Digital Cards/MultiMedia Cards SD cards and MMC’s are small, convenient, and durable stamp-sized flash memory cards. SD cards and MMCs are designed to interface with an array of Other USB digital devices including PDAs, cellular phones, digital video recorders and Supported Devices digital cameras.

  • Page 155: Mp3 Player Controls

    Options MP3 Player Controls When you have downloaded and copied your MP3 files to the SD card/MMC you may eject the player and use it as a standalone player running on battery power (the player does not need to be powered on when inserted into the slot in the notebook).
  • Page 156 Options Icon Description Headphone-Out Jack Mini USB Port Secure Digital/MMC Slot Power On/Off Table 7 - 1 Audio Volume Up/Down MP3 Player Controls Play/Pause Stop Previous Track Next Track Equalizer Toggle 7 - 6 The MP3 Player...

  • Page 157: The 6-In-1 Flash Card Reader

    Options The 6-in-1 Flash Card Reader The card reader allows you to use the most popular digital storage cards (the information on “Secure Digital Cards/MultiMedia Cards” on page 7 - 4 also Software Installation generally applies to the card types used in the Flash Card Reader). The formats Warning which can be read include: Make sure the 6-in-1...

  • Page 158: Tv Tuner

    Options TV Tuner The optional TV Tuner allows you to watch TV, play music CDs, video con- ference and capture still images and video on your PC. TV Tuner Remote The TV Tuner comes with a remote control unit, a CD with TV Studio Appli- The remote control unit provided with the op- cation Utility Software (containing a User Guide) and a quick driver installa-...

  • Page 159: Installing The Tv Tuner

    Options Installing the TV Tuner The TV Tuner is installed in the bay indicated below. Turn the computer OFF. Line-In Function with Place the computer on a clean, stable surface and turn it over. TV Tuner Remove screws (Figure 7 - With the TV Tuner in- stalled, the line-in jack will only be functional...
  • Page 160 Options Carefully insert the TV Tuner module into the computer, aligning the rear of the TV Tuner with the hole at point (see sidebar). The TV Tuner module should align with the connecting pins at point (push firmly down to make sure the module is secure). Cover Secure the model by inserting screws If the hole in the com-...

  • Page 161: Ip Sharing Module

    Options IP Sharing Module The optional IP sharing module allows you to share your xDSL or cable mo- dem internet connection with up to 4 other computers. You can also share files Installing the IP and printer connections with other machines connected to the ports. Sharing Module The IP sharing module The IP sharing module is a BroadBand IP Gateway and Fast EtherSwitch in-...

  • Page 162: Ip Sharing Module Driver Installation

    Options IP Sharing Module Driver Installation (Win2000 & Windows XP) 1. Insert the IP Sharer CD-ROM into the CD/DVD drive. 2. The program will Autorun. 3. Click OK and follow Install Wizard’s the on-screen instructions. 4. If you need help you can click View Quick Install Guide for instruc- tions.

  • Page 163: Cable Connections

    Options Cable Connections Your existing cable modem or xDSL connection will connect to the RJ45 LAN jack at rear of your computer. Any other devices will connect to one of the four ports on the IP sharing module. When a device is connected the LED indicators will flash.

  • Page 164: Computer Setup

    Options Computer Setup In the following quick setup guide, instructions are grouped by operating sys- tem. For full setup and configuration instructions refer to the accompanying manual and quick start guides on the IP Sharer CD-ROM . The following op- erating systems are covered.

  • Page 165: Windows 2000 Setup

    Options Windows 2000 Setup 1. Go to My Computer > Control Panel > Network and Dial-up Connec- tions . 2. Double-click Local Area Connection . Figure 7 - 10 Win 2000 Setup IP Sharing Module 7 - 15...

  • Page 166: Windows Xp Setup

    Options Windows XP Setup 1. Go to My Computer > Control Panel > Network and Internet Connec- tions > Network Connections . 2. Double-Click Local Area Connection . Figure 7 - 11 Win XP Setup 7 - 16 IP Sharing Module...

  • Page 167: Checking The Internet Connection

    Options Checking the Internet Connection Note : To configure this device, you must have Internet Explorer 4.01 or above installed. To see if the IP Sharing device is visible on the local network, go to Start > Run “PING 192.168.1.254” . To check if this IP Sharing device is connected to the Internet, run “...

  • Page 168: The Wireless Lan & Bluetooth Modules

    Options The Wireless LAN & Bluetooth Modules If your purchase option includes the 802.11b Wireless LAN module and/or Bluetooth module, follow the information on the following pages for instruc- tions on installing the driver. Pay careful attention to the warnings concerning the use of wireless modules aboard aircraft, and the instructions on enabling/ disabling power to the modules.

  • Page 169: The Wireless Lan Module

    Options The Wireless LAN Module Wireless LAN Driver Installation Wireless Device ( Win2000 & WinXP) Operation Aboard 1. Toggle power to the WLAN module (use the Fn + F7 key combination). Aircraft 2. Insert the Wireless LAN CD-ROM into the CD drive. 3.
  • Page 170 Options Figure 7 - 12 Wireless LAN Screens 7 - 20 The Wireless LAN Module...

  • Page 171: The Bluetooth Module

    Options The Bluetooth Module Bluetooth Module Installation Wireless Device (Win2000 & WinXP) Operation Aboard 1. Toggle power to the WLAN module (use the Fn + F8 key combination). Aircraft 2. Insert the Bluetooth CD-ROM into the CD drive. 3. The program will run automatically. The use of any porta- 4.
  • Page 172 Options Figure 7 - 13 Bluetooth Control Panel & My Bluetooth Places 7 - 22 The Bluetooth Module...

  • Page 173: Raid Configuration

    Options RAID Configuration If you have included the optional FastTrak100-Lite RAID (Redundant Array of Independent Disks) configuration in your purchase option, this will allow Windows 2000 & RAID Driver you to use your hard disks in combination with Striping ( RAID 0) or Mirror- Installation ing ( RAID 1) for fault tolerance and performance (see “RAID Configura-...

  • Page 174: Raid Setup

    Options RAID Setup To create a disk array you will need to open the FastBuild Utility which is built into the BIOS if you have included the RAID option in your purchase config- uration. You will also need a blank floppy disk. Startup the computer, and Figure 7 - 14 when you see the screen below press the Ctrl + F key combination to enter FastTrak BIOS...
  • Page 175 Options You can create two types of array as outlined in Table 7 - 2, “RAID Descrip- tion,” on page 23 • RAID 0 - A Striped array for enhanced performance (1 or 2 drives) Setup Options • RAID 1 - A Mirrored array for data security (2 drives treated as one) What options are avail- able in “Optimize Ar- After the FastBuild Utility you will see the menu options below:...
  • Page 176 Options You will now need to format the array as if it were a single hard drive. Device Have a floppy disk ready and copy the Drivers folder from the Drivers & Utilities + User’s Manual CD-ROM : to the floppy disk Navigate (Browse..) to D:Drivers\RAID\Drivers.

  • Page 177: Troubleshooting

    Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting the service center, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the an- swer in these pages, make sure you have followed the instructions carefully and observed the safety pre- cautions in the preface.

  • Page 178: Basic Hints And Tips

    Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer appears not to be working. Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip , make sure it is actually working.

  • Page 179: Backup And General Maintenance

    Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases e.g.

  • Page 180: Viruses

    Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the definitions file updates are usually downloadable directly from the internet.

  • Page 181: Upgrading And Adding New Hardware/Software

    Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing.
  • Page 182 Troubleshooting • Don’t over complicate things. The less you have to deal with then the easier the source of the problem may be found; Example - if your computer has many devices plugged into its ports, and a number of programs running, then it will be difficult to determine the cause of a problem. Try disconnecting all of the devices and restarting the computer with all the peripheral devices unplugged.

  • Page 183: Power

    Troubleshooting Power Problem Possible Cause/Solution You turned on the power The battery is missing or incorrectly installed - Make sure the battery is present and seated but it doesn’t work. properly in the battery bay, and that nothing is interfering with the battery contacts. (The battery status LED , doesn’t light up.) The battery status LED...
  • Page 184 Troubleshooting Problem Possible Cause/Solution The notebook feels too The system is using too much power - If your OS has a Power Options scheme (see hot. “Enabling Power Options” on page 3 - 15) check its settings. You may also be using a PC card device which is drawing a lot of power.

  • Page 185: Display

    Troubleshooting Display Problem Possible Cause/Solution Nothing appears on The system is in a power saving mode - Toggle the suspend key combination Fn + Esc screen and the LED (see “The Function Keys and Numeric Keypad” on page 2 - 20).

  • Page 186: Hard Disk Drive (Hdd) Boot Password

    Troubleshooting Hard Disk Drive (HDD) Boot Password Problem Possible Cause/Solution The computer takes Data saved on the hard disk drive may be lost or damaged - Operate the scan disk or disk longer during Startup. defragmenter to check for any lost or damaged data. The computer is waking up from Hibernate mode.

  • Page 187: Floppy Disk Drive (Fdd)

    Troubleshooting Floppy Disk Drive (FDD) Problem Possible Cause/Solution The floppy disk drive will The floppy disk is not formatted - Format the disk (you may do this by right-clicking the not write data to disk. disk icon in My Computer in Windows and choosing Format from the menu). Bear in mind that this will erase all data contained on the floppy disk.

  • Page 188: Audio

    Troubleshooting Audio Problem Possible Cause/Solution The Audio “DJ” CD The computer is turned ON (see “Audio “DJ” CD Player” on page 3 - 23) -Check your Player will not turn on computer is not turned on (or running in a power saving mode), and if it is, then shut it (nothing appears on the down and toggle the ON/OFF switch on the CD Player.

  • Page 189: Cd Device

    Troubleshooting CD Device Problem Possible Cause/Solution The compact disc cannot The compact disc is dirty - Clean it with a CD-ROM cleaner kit. be read. The compact disc tray The compact disc is not correctly placed in the tray - Gently try to remove the disc using will not open when there the eject hole (see “Loading Compact Discs”...

  • Page 190: Pc Card

    Troubleshooting PC Card Problem Possible Cause/Solution The system cannot The PC Card is not inserted into the socket or inserted incorrectly - Remove the card and recognize the PC card. reinsert it aligning the PC Card with the slot. Push the card in until it locks into place. The PC Card driver is not installed - Make sure to read the documentation which comes with any new external device, and make sure you install the driver for it as this will allow you to access any extra functions which come with your device.

  • Page 191: Keyboard And Mouse

    Troubleshooting Keyboard and Mouse Problem Possible Solution Unwelcome numbers The NumLk is turned ON (the LED is lit) - Press and release the Fn & NumLk keys. appear when typing. I have installed a new You have not installed the driver to enable any extra functions - Make sure you read the external keyboard or documentation which comes with any new external device, and make sure you install the mouse but cannot use all...

  • Page 192: Printer

    Troubleshooting Printer Problem Possible Cause/Solution The printer cannot be The printer is not turned on, or has an internal problem - Make sure the printer is on. You added to the system or may refer to the printer’s manual for instructions on printing a “self-test” page (a “self-test” will not work.

  • Page 193: Operation

    Troubleshooting Operation Problem Possible Solution The system won’t start The Audio “DJ” CD Player is ON (see “Audio “DJ” CD Player” on page 3 - 23). Toggle up when the power the ON/OFF switch off the CD Player. button is pressed. The system freezes.
  • Page 194 Troubleshooting Problem Possible Solution The Infrared device The drivers (if supplied with the device) are not loaded. Please read the documentation doesn’t work. which comes with any new external device, and make sure you install the driver (if one is required) for it as this will allow you to access any extra functions which come with your device.

  • Page 195: Appendix A. Specifications

    Appendix A. Specifications Processor Options Memory • Intel Pentium 4 Processor - (478-pin) mFC- • 64 bit data bus system memory PGA2 package supporting Hyper Threading • Two 200-pin DDR SODIMM sockets, support- Technology ing Dual DDR SDRAM SODIMM (2.5V) - DDR400MHz or DDR333MHz compliant µ...

  • Page 196: Display

    Display • 2nd Modular Drive Bay ( Bay Two ) for one of the following: • ATI Radeon 9600 PRO High Perfomance Chip DVD-ROM (12.7mmH) • 128MB DDR Graphic Memory Onboard CD-ROM • UltraAGP™ 8x CD-RW • 128-bit 2D/3D Graphics Engine Combo Drive (DVD-ROM + CD-RW / DVD-RW) •...

  • Page 197: Audio

    Audio Interface • Virtual 6-Channel Audio Output • Built-in TouchPad (PS/2) • AC'97 2.2 Compliant Interface • Four USB 2.0 Ports (USB 1.1 compatible) • Compatible with Sound-Blaster PRO™/ 16 • One IEEE 1394 Port • Advanced Wavetable Synthesizer • One S-Video-Out Jack for TV output •...

  • Page 198: Communication

    Communication Power • Wireless Infrared Transfer IrDA 1.1, 1cm~1M • Full Range 120 Watt AC adapter - AC in Operating Distance, 4Mbps FIR 100~240V, 47~63Hz • 1000 BASE-T (Gigabit) Ethernet LAN on board • Supports Smart Lithium-Ion Battery 14.8v, (10/100 BASE-T compatible) 6.6Ah (12 cells) •...

  • Page 199: Environmental Spec

    Environmental Spec Optional • Temperature • DVD-ROM Drive (12.7mmH) ° ° • CD-RW Drive (12.7mmH) Operating: C~ 35 • Combo Drive (DVD-ROM and CD-RW, ° ° Non-Operating: C ~ 60 12.7mmH) • Portable MP3 Player • Relative Humidity • USB Wireless LAN Module Operating: 20% ~ 80% •...
  • Page 200 A - 6...

Table of Contents