Asf Hp Sensor Removal - Epson Stylus COLOR 800 Service Manual

EPSON Stylus &2/25 800

3.11.2 ASF HP Sensor Removal

1. Remove the ASF assembly. (Refer to Section 3.11.)
2. Remove the right hopper release lever in the ASF assembly.
3. Remove the bushing from the left edge of the loading (LD) roller shaft in the ASF assembly.
(See Figure 3-32.)
4. Shift the LD roller shaft left about 2 cm (1"). Then, using tweezers, release the tab fixing the
detection wheel at the left edge of the LD roller shaft. (See Figure 3-33.)
3-26
Figure 3-32. Bushing Removal
Figure 3-33. Detection Wheel Removal
Rev. A