Download Print this page

Advertisement

5.
Enter the 4-column code which corresponds to the destination for "Memory-SW data (4 col data)"
and press "ENTER" key. (See the code list on Page 4-6.)
6.
Enter "2" for "Select menu : ?" to select "Adjustment/Print inspection" in the menu.
7.
Press "ENTER" key, and the sub menu below appears.
8.
Enter "1" for "Select menu : ?" to select "Write to the Head voltage value" in the menu.
9.
Press "ENTER" key, and the following appears.
10. Input the correct head voltage with 5 colums and check if the head voltage value was input on the
confirmation menu which is shown on the screen. If correct, press "ENTER" key. If incorrect, press
"SPACE" key and replace the incorrect value with the correct one.
Rev. A
Figure 4-13. "Adjustment/Inspection" Sub Menu
Figure 4-14.
"Write to the Head Voltage Value"
Adjustment
4-11

Advertisement

Chapters

Troubleshooting

   Also See for Epson Stylus COLOR 800

   Related Manuals for Epson Stylus COLOR 800

Comments to this Manuals

Symbols: 0
Latest comments: