Epson Stylus COLOR 800 Service Manual page 93

EPSON Stylus &2/25 800
3.12 Paper Feed (PF) Motor Assembly Removal
1. Remove the ASF. (Refer to Section 3.11.)
2. Remove 1 C-ring and 1 plain washer securing the combination gear (14 mm, 31.5 mm) to
the left frame.
3. Remove 2 screws (CBS, 3x6, F/Zn) securing the PF motor assembly to the left frame.
(Refer to Figure 3-35.)
4. Push the PF motor assembly inward, holding the combination gears, and remove the PF
motor assembly and the combination gears. (Refer to Figure 3-36.)
3-28
Figure 3-35. PF Motor Assembly Removal (1)
Figure 3-36. PF Motor Assembly Removal (2)
Rev. A