Download Print this page

Advertisement

5. Insert tweezers into the slit in the back of the ASF HP sensor, and release the clips. Then
remove the ASF HP sensor. (See Figure 3-34.)
When mounting the detection wheel onto the LD roller shaft, push the wheel into the
shaft until it clicks.
The bushing at left end of the LD roller shaft must be located on the right of the left
hopper release lever. (See Figure 3-32.)
Rev. A
Figure 3-34. ASF HP Sensor Removal
Disassembly and Assembly
3-27

Advertisement

Chapters

Troubleshooting

   Also See for Epson Stylus COLOR 800

   Related Manuals for Epson Stylus COLOR 800

Comments to this Manuals

Symbols: 0
Latest comments: