Epson Stylus COLOR 800 Service Manual page 129

5. Enter the the 4-column code which corresponds to the destination for "Memory-SW data (4 col
data)" and press "ENTER" key. (See the code list on Page 4-6.)
6. Enter "2" for "Select menu : ?" to select "Adjustment/Print inspection" in the menu.
7. Press "ENTER" key, and the sub menu below appears.
8. Enter "0" for "Select menu : ?" to select "Ink charge" in the menu.
9. Press "ENTER" key, and the menu returns to the sub menu and the Initial ink charge sequence
starts. The Power LED on the control panel is blinking during this operation.
10. If you don't proceed to the next adjustment, enter "9" for "Select menu : ?" to select "Customer
data change/End" in the current menu, and the menu returns to the main menu.
11. Enter "9" for "Select menu : ?" then press "ENTER" to exit the program.
Rev. A
Figure 4-10. "Adjustment/Inspection" Sub Menu
Adjustment
4-9