Epson Stylus COLOR 800 Service Manual page 108

When mounting the paper end sensor assembly on the top frame, be sure to mount the
torsion spring correctly at the point shown in Figure 3-57.
After installing the paper empty sensor lever, ensure it bounces smoothly.
Install the paper empty sensor and right paper guide assembly in the following order:
c
Mount the paper empty sensor onto the top frame.
d
Align the paper empty sensor lever with the cutout in the upper paper guide
assembly.
e
Attach the right paper guide assembly to the top frame, or refer to POINTS TO
NOTE in Section 3.13.5.
Ensure that the hooks for the PE sensor assembly fit securely into the cutouts in the top
frame.
Rev. A
Figure 3-56. Torsion Spring
Disassembly and Assembly
3-43