Epson Stylus COLOR 800 Service Manual page 114

5. Remove 2 screws (CBS, 3X6, F/Zn) securing the middle sub frame, then remove the
middle sub frame and the following 11 parts from the sub pump frame:
c Combination gear (12, 15)
e Spring washer (5.3x0.07x10, S/Na)
g Cam
i Combination gears (12, 26)
k 3 E-rings (4, F/UC)
(See Figure 3-65.)
Do not mount the E-ring before engaging all frames. Otherwise frames and shafts may
bend. Be sure to use the exclusive E-ring holder to avoid damaging gears and shafts.
Notice how gears engage. See figures 3-64 and 3-65.
Tightening torque for the screws (CBS, 3x6, F/Zn) = 8 ~ 10 kg-cm.
After tightening screws, make sure the U-shaped spring washer is mounted correctly.
Rev. A
Figure 3-64. Middle Sub Frame Removal
CAUTION
Disassembly and Assembly
d Plain washer (5.2x0.3x12, S/Na)
f Combination gear (14.4, 21.6)
h Torsion spring (7.3)
j Gear (11.5)
3-49