Download Print this page

Epson Stylus COLOR 800 Service Manual: Asf (auto Sheet Feeder) Removal

Hide thumbs

Advertisement

3.11 ASF (Auto Sheet Feeder) Removal

1. Remove the C202 PSB/PSE board assembly. (See Section 3.4.6.)
2. Remove 2 screws (CPS, 4x10 and ASF fixing screw, F/Zn) securing the ASF to the right
frame and to the rear left of the frame, respectively. (See Figure 3-20.)
3. Remove 1 gear (27.2 mm) at the right edge of the ASF from the hopper release lever by
squeezing with tweezers or prying a Phillips screwdriver into the joint. (See Figure 3-21.)
Rev. A
Figure 3-20. Removal of Screws Fixing the ASF
Figure 3-21. Gear (27.2 mm) Removal
Disassembly and Assembly
3-19

Advertisement

Table Of Contents

Troubleshooting

   Also See for Epson Stylus COLOR 800

   Related Manuals for Epson Stylus COLOR 800

Comments to this Manuals

Symbols: 0
Latest comments: