EPSON Stylus &2/25 800
4. Remove 1 hexagon nut (6N, class-2, M4) and 1 draft spring (0.4 g) securing the slider shaft
Remove 2 screws (CBS, 3x6, F/Zn) securing the inner sub frame. Then remove the inner
sub frame and following 6 parts from the middle sub frame:
c Combination gear (12 mm, 20.8 mm)
e Plain washer (7.2x0.3x12, S/Na)
g Compression spring (0.31 g)
(See Figure 3-64.)
3-48
Figure 3-63. Inner Sub Frame Removal
d Gear (16.8 mm)
f Compression spring (0.26 g)
h Plain washer (5.2x0.2x11, S/Na)
Rev. A