Asf Assembly Disassembly - Epson Stylus COLOR 800 Service Manual

3.11.1 ASF Assembly Disassembly

1. Remove the ASF. (See Section 3.11.)
2. Remove the left shaft bushing, located at the left end of the loading (LD) roller shaft. (See
Figure 3-23.)
Remove this bushing with care so you do not damage it.
3. Shift the LD roller shaft about 1 cm (half an inch) left, and using tweezers, and release the
tab attaching the detection wheel to the left edge of the LD roller shaft. Then remove the
detection wheel. (See Figure 3-24.)
Rev. A
Figure 3-23. Left Bushing Removal
CAUTION
Figure 3-24. Detection Wheel Removal
Disassembly and Assembly
3-21