Using The Network Scanner Admin Tool - Fujitsu fi-6010N Operator's Manual

8.3.4 Problems when Connecting to the Scanner using the Network
Scanner Admin Tool
If, when connecting to the scanner via a web browser, the "Scripts are usually safe. Do you want to
allow scripts to run?" message appears, or the "Login" screen appears but the buttons can not be
selected, try the following steps:
No.
1 In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", [Secu-
rity] tab, the security level for the corre-
sponding zone is set as "High", or in
[Custom level], "Scripting", "Active
scripting" is set to "Prompt" or "Disable".
8.3 Network Connection Troubleshooting
Problem
Network Scanner fi-6010N Operator's Guide
Action
In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", try the
following settings for the corresponding
zone.
•
s
To enable "Active cripting", set in one of
the following ways:
•
In the [Security] tab, set the required
"Security level for this zone" to
"Medium".
•
In the [Security] tab, select the [Cus-
level
tom ] button. Then, set the
"Scripting", "Active
"Enable".
•
If connecting via the Internet zone, on the
[Privacy] tab, set the level to below
"Medium High".
After the above settings have been per-
formed, in "Temporary Internet Files",
press the [Delete cookies] button to delete
all temporary internet files.
s
cripting" to
8
365