Fujitsu fi-6010N Operator's Manual page 85

4. Specify the scanner as a workgroup or domain member.
• For a workgroup
Press the [Workgroup] button, and enter a workgroup name.
Workgroup names may be up to 15 characters long.
The default name is "WORKGROUP".
• For a domain
Press the [Domain] button and enter a domain name.
Domain names may be up to 155 characters long.
5. Press the [OK] button.
⇒
The restart confirmation screen appears.
In the following case, the authentication screen appears.
HINT •
When specifying the scanner as a domain member
•
When changing the scanner from a domain to a workgroup member
•
When changing the name of a scanner that is a member of a domain
1. Enter a user name.
2. Enter a password.
3. Press the [OK] button.
User names may be up to 256 characters long.
Passwords may be up to 256 characters long.
If the user name and password are valid, the restart confirmation
screen appears.
Network Scanner fi-6010N Operator's Guide
4.5 Using the System Settings Menus
4
51