Fujitsu fi-6010N Operator's Manual page 430

Screen
Network
Printer
396
Message
Access was refused.
Operation not possible. Network path
is not working.
Not connected to the network.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Length of specified network printer
path exceeds the maximum selectable
path length. This printer may not be
selected.
Cannot acquire network information.
Specified user is no longer able to
login to this network printer.
Specified password is no longer valid
for this network printer.
Action
Contact a server administrator to
find out if an access permit has
been set.
Contact a server administrator.
Check that the system network is
functioning normally by perform-
ing a ping test from another
machine in the network, other than
the server with network printer. If
the system network is not operat-
ing correctly, refer to
connect to a server using its IP
address" (page 359) for further
solutions.
Close unneeded network connec-
tions, then try specifying the
desired network path again.
Select a different network printer
and try again.
Contact an administrator for the
specified server.
The Specified user account has
expired.
Try the following:
• Login with a different account.
• Contact a network administrator
to have the account validated.
Change the password before log-
ging in to the network printer for
the first time.
Try the following:
• Login with a different account.
• Contact a network administrator
to have the password changed.
"Failure to