Fujitsu fi-6010N Operator's Manual page 199

10. Repeat Step 4 through
•
Up to six job buttons can be set.
HINT
•
To clear the details that have been set for a job button, select the job but-
ton to be cleared, and then select the [Clear] button.
11. Change the order of the job buttons as necessary.
Select the job button to move, and then select either the [Up] button or the [Down] button to
move it.
The relationship between the order of job buttons on the "Job Menu Layout" area and the
arrangement of buttons on the "Job Menu" is shown below.
12. Set whether to show the user log button.
• If [Yes] is selected
The user log button is shown in the "Job Menu" window.
• If [No] is selected
The user log button is not shown in the "Job Menu" window.
13. Select the [OK] button.
⇒
A job menu is added to the "Job Menus List" window.
Step 9 as required for the number of job buttons.
Network Scanner fi-6010N Operator's Guide
4.10 Setting Job Features
4
165