Installing The Central Admin Console - Fujitsu fi-6010N Operator's Manual

2. Press the [Next] button for "iScanner Central Admin Server".
⇒
Follow the wizard instructions displayed on the window.
The following port number and protocol settings will be required. Enter the same port
number and protocol settings as used for the pre-settings.
• Port number for scanner communication
• Port number for Central Admin Console communication
After installation, the port number and protocol settings can be changed on the Central
Admin Console "Central Admin Server Settings" screen.
⇒
After installation is complete, restart the computer.

5.3.2 Installing the Central Admin Console

Instal the Central Admin Console in a personal computer.
ATTENTION
HINT
5.3 Pre-settings for Using Central Admin Console
If the Central Admin Console is already installed, it is not necessary to
install it again. Perform the procedures from
Admin Console" (page 183).
•
For details of the operating environment when installing the Central Admin
Console, refer to "1.4.2 Requirements for Central Admin Console" (page
12).
•
When installing the Central Admin Console, the same necessary pre-set-
tings before logging in with the Admin Tool are required. For more details,
refer to "4.4.1 Setting up for Administrator Access via the Network Scanner
Admin Tool" (page 38).
"5.3.2 Installing the Central
Network Scanner fi-6010N Operator's Guide
5
183