Pre-Settings For Using Central Admin Console; Installing The Central Admin Server Software - Fujitsu fi-6010N Operator's Manual

5.3

Pre-settings for Using Central Admin Console

This section explains the required pre-settings for using the Central Admin Console.
The pre-settings are as follows.
1. Install the Central Admin Server software.
For more details, refer to
2. Install the Central Admin Console.
For more details, refer to
3. Setup a firewall for the Central Admin Server.
For more details, refer to
184).
4. Configure the scanner settings.
For more details, refer to
agement" (page

5.3.1 Installing the Central Admin Server Software

Instal the Central Admin Server software in a personal computer.
The following describes the required settings for scanner.
ATTENTION
HINT
1. Perform
⇒
The "Download" screen appears.
182
"5.3.1 Installing the Central Admin Server Software" (page
"5.3.2 Installing the Central Admin Console" (page
"5.3.3 Setting up a Firewall for the Central Admin Server" (page
"5.3.4 Configuring the Scanner Settings for Central Admin Man-
185).
If the Central Admin Server software is already installed, perform the proce-
dures from "5.3.2 Installing the Central Admin Console" (page
•
For details of the operating environment when installing the Central Admin
Server software, refer to
(page 13).
•
When installing the Central Admin Server software, the same necessary
pre-settings before logging in with the network scanner admin tool are
required. For more details, refer to
Access via the Network Scanner Admin Tool" (page
Step 1 to Step 3 of "Installing the Network Scanner Admin Tool" (page
"1.4.3 Requirements for Central Admin Server"
"4.4.1 Setting up for Administrator
182).
183).
183).
38).
40).