Fujitsu fi-6010N Operator's Manual page 462

Code
12010003
12010004
12010005
12010006
12010100
12020001
428
Message
"From" address was rejected by
the server when sending e-mail.
"To" address was rejected by
the server when sending e-mail.
e-Mail size exceeded maxi-
mum e-mail size allowed by the
SMTP server.
SMTP server connection was
lost while sending e-mail.
Error: e-mail could not be sent.
Scanned data size exceeded
maximum size allowed for
sending by fax.
Action
Contact a system administrator to check
that the specified e-mail source address is
authorized for use on the server.
Contact a system administrator to check
that the specified e-mail destination
address is authorized for use on the server.
Contact a system administrator to check
the maximum e-mail size allowed by the
SMTP server.
Try the following:
• Check that the LAN cable of the scanner
and SMTP server is connected properly.
• Contact a system administrator to check
that then scanner IP address and SMTP
server settings are correct.
"8.3 Network Connection Troubleshoot-
ing" (page 354)
• Contact a system administrator to check
that the SMTP server is working prop-
erly.
• Contact a system administrator to check
the maximum e-mail size allowed by
the SMTP server.
Contact a system administrator to check if
sending e-mail is allowed.
Try the following:
• Reduce the number of pages to be
scanned and send the fax in separate
parts.
• Select a higher compression level, and
try again.
"6.8.9 Compression" (page 295)
If the problem persists, contact a system
administrator to check the "Maximum
Attachment Size" setting.
"4.6.11 Setting the e-Mail Server (SMTP
Server)" (page 92)