Administrator Screen Messages - Fujitsu fi-6010N Operator's Manual

D.1.1 Administrator Screen Messages
Screen
Scanner Name Scanner name contains invalid charac-
ters.
Multifeed Set- Multifeed detection limit #2 must be
tings larger than limit #1.
Multifeed detection limit #1 is invalid.
Multifeed detection limit #2 is invalid.
Scanner Invalid front side horizontal offset has
Adjustment been entered.
Invalid reverse side horizontal offset
has been entered.
Invalid front side vertical offset has
been entered.
Invalid reverse side vertical offset has
been entered.
Invalid length magnification adjust-
ment has been entered.
Front side horizontal offset has not
been set.
Reverse side horizontal offset has not
been set.
Front side vertical offset has not been
set.
Reverse side vertical offset has not
been set.
Message
Network Scanner fi-6000NS Operator's Guide
Action
Re-enter the scanner name using
only specified valid characters.
Do not enter a blank space before
or after the scanner name. Do not
use control characters or any of the
following symbols:
"/\ [ ] : | < > + = ; , ?
Re-enter a value for "#2" that is
larger than the value for "#1".
Re-enter a value for "#1" that is
between 0 and 510 (mm).
Re-enter a value for "#2" that is
between 0 and 510 (mm).
Re-enter a value for front side hor-
izontal offset that is between -4
and 4.
Re-enter a value for reverse side
horizontal offset that is between -4
and 4.
Re-enter a value for front side ver-
tical offset that is between -4 and
4.
Re-enter a value for reverse side
vertical offset that is between -4
and 4.
Re-enter a value for "Length Mag-
nification" that is between
-3.1 and 3.1 (%).
Set a front side horizontal offset.
Set a reverse side horizontal offset.
Set a front side vertical offset.
Set a reverse side vertical offset.
D
393