Edge Cropping - Fujitsu fi-6010N Operator's Manual

6.8.18 Edge Cropping

The width of the edges of a document to be scanned can be adjusted, so that unwanted sections are
not scanned.
If using the edge cropping setting, the width of the edges to be cropped can be adjusted with this
setting.
1. On the "Scan Settings" screen, select the [Quality] tab.
2. Press the [Edge Cropping] button.
⇒
The "Edge Cropping" screen appears.
3. If edge cropping is to be used, enter the width of the edges to be cropped.
Edge Cropping Setup
Off
On
4. Press the [OK] button.
⇒
This returns you to the "Scan Settings" screen. The selected setting is displayed to the
right of the [Edge Cropping] button.
306
Temporary
Scan without cropping edges.
Scan and crop edges.
Enter a value for Top/Bottom and Left/Right from 1 to 500.
Enter values in units of 0.1mm.
Status