Fujitsu fi-6010N Operator's Manual page 436

Screen
Common
Add-in Man-
ager
Network
Scanner Admin
Tool
Central Admin
Server
Job Settings
402
Message
Error: problem with XXXXXX.
Contact your FUJITSU scanner dealer
or an authorized FUJITSU scanner
service provider.
Error code=xxxxxxx
Result code=xxxxxxx
(XXXXXX: Function Name)
Error: problem with XXXXXX.
Contact your FUJITSU scanner dealer
or an authorized FUJITSU scanner
service provider.
(XXXXXX: Function Name)
Specified Add-in data contents are
invalid.
Specified Add-in file cannot be
applied to this system.
Specified Add-in could not be
uploaded.
System version xx or later is required
to install the specified Add-in.
Connection error.
xxx
xxx
Action
Contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
Contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
Check the contents of the specified
Add-in module.
Check the system version, prepare
the correct version of the update
file, and try again.
Try the following:
• Check if the specified update
file is correct, and try again.
•
Specified update file may not
be uploaded because of a net-
work error. Check the network
status.
Update the system, and then install
the Add-in module.
If this error appears when connect-
ing, reset the IP address and try
connecting again.
If the error appears when using the
network scanner admin tool, con-
tact the network administrator to
check the network operating envi-
ronment.
xxx
xxx