3. Enter the job group name.
This may be up to 64 characters long.
4. Select the [Select] button.
⇒
The "Select Job Menu" window appears.
5. Select a job menu.
6. Select the [OK] button.
⇒
A job menu is set on the "Settings For Selected Group(s)" area.
7. Set the screen to be displayed after login.
• If [Both Job & Multi-Function] is selected
The user can use both the Main Menu (refer to
(page
29)) and Job Menu (refer to
button on the screen.
The screen that is displayed first after log in can be specified by the following settings.
•
If the [Multi-Function Menu] option button is selected
The Main Menu appears first.
•
If the [Job Menu] option button is selected
The Job Menu appears first.
• If [Job Only] is selected
The Main Menu is not displayed, and the Job Menu always appears.
4.10 Setting Job Features
"3.2 Required Scanner Function Settings"
"4.10.3 Setting a Job Menu" (page
Network Scanner fi-6010N Operator's Guide
162)) by pressing a
169
4