Fujitsu fi-6010N Operator's Manual page 198

4. Select the job button and select the [Edit] button.
⇒
The "Job Button Settings" window appears.
5. Enter the job button name.
This may be up to 32 characters long.
6. In the [Job Button Color] drop-down list box, select the color for job button.
When job button color is selected, a Job Button Pixmap appears in the right side of the [Job
Button Color] drop-down list box. allowing to check the display image of the button while
making a selection.
7. Set whether to start up the Add-in module.
To start up the Add-in module when the job button is selected, select the [Use button to start
Add-in module] checkbox.
If this checkbox is selected, the Add-in module is assigned to the job button, rather than the
job.
8. Select a job from the list.
HINT
9. Select the [OK] button.
⇒
A job button is set on the "Job Menu Layout" area.
164
To filter jobs, enter part of a "Job Name" and "Comment", or select all, and
press the [Find] button.
"Job Name" may be up to 64 characters long.
"Comment" may be up to 256 characters long.
To clear all filtered results, delete the entered "Job Name" and "Com-
ment", and press the [Find] button.