Fujitsu fi-6010N Operator's Manual page 446

Network
Hide thumbs Also See for fi-6010N:
Table of Contents

Advertisement

Screen
Scanning
Roller Clean-
ing
Main Menu
Shutdown
Scan Test
412
Message
When the file format is [MTIFF], the
maximum file size for the total
scanned data is 2GB. If the size of the
scanned data exceeds 2GB, no MTIFF
files can be created.
Scanner top cover is closed. Open the
cover and try again.
Press the keyboard [C] key to step the
feed rollers forward. Press the [OK]
button after the feed rollers have been
cleaned.
Maximum number (10) of
Scan&Buffer jobs already queued,
please wait...
Shutdown will occur after all job fin-
ish. Please wait...
Document not found. Load a docu-
ment into the ADF, making sure the
side guides are adjusted correctly and
try again.
Feed Error: Document(s) may not
match the set paper size, ADF may
have grabbed more than one sheet, or
documents may not be suitable for
scanning. Remove the documents
from the ADF, check them and try
again. If problem persists, consult the
manual.
Action
Try the following:
• Delete scanned pages from
Scan Viewer until the total file
size of the scanned data is less
than 2GB.
• Increase the compression level
and try scanning again.
Open the top cover to clean the
feed rollers, and try again. For
details, refer to
"7.2.1 Cleaning the
ADF" (page
324).
Clean the rollers, and then press
the [OK] button.
A maximum of ten jobs may be
buffered. The scanner is busy.
Please wait.
Operations cannot be carried out
while the scanner is shutting down.
The scanner will shutdown auto-
matically. Please wait.
Load the document into the ADF
paper chute, and try again. Load
the document to prevent any space
between the side guides and the
edges of the documents.
For details, refer to
"6.1 Loading
Documents" (page
220).
Press the ADF release button to
open the top cover, and remove the
documents from the ADF. If more
than one sheet has been fed, reset
the document and try again.
Check that the actual document(s)
size matches the paper size speci-
fied in the "Paper Size" screen. If
not, specify the paper size again.
For details, refer to
"6.8.3 Paper
Size" (page
282).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6010n - fi - document scanner

Table of Contents