Setting The Proxy Server - Fujitsu fi-6010N Operator's Manual

4.6.7 Setting the Proxy Server

1. Select the [Network Settings] tab on the top menu.
2. Select the [Proxy Server] tab on the left side menu.
⇒
The "Proxy Server" screen appears.
3. Enter the proxy server FQDN, host name or IP address in the "Address" input field.
•
For FQDN or host names
Up to 255 characters may be entered.
•
For IP addresses
The following format should be used xxx.xxx.xxx.xxx (xxx is a value from 0 to
255).
4. Enter a port number for the proxy server, from 1 to 65535, in the "Port Number" field.
5. Press the [OK] button.
⇒
The proxy server is set.
ATTENTION
80
Touch
Panel
If this setting is not entered, the proxy setting on the "Network Folder", FTP
server settings screen, cannot be used. For more details about specifying
an FTP server folder as a network folder, refer to
work Folders" (page 109)
Central
Admin
Admin
Tool
"4.6.14 Setting the Net-