Fujitsu fi-6010N Operator's Manual page 92

3. Press the [List] button for the "Logout after" input field.
⇒
A list of "Logout after" times appears.
4. Select the desired time before automatic log out.
The default time is "5min".
If the [Never] button is pressed, automatic logout is not performed.
5. Press the [List] button for the "Standby after" input field.
⇒
A list of "Standby after" times appears.
6. Select the desired time before standby mode.
The default time is "15min".
ATTENTION
7. Press the [OK] button.
⇒
The scanner is set to first standby and then automatically log out after the specified times.
58
If the [Never] button is selected for "Logout after", the selected time
for "Standby after" is used as the wait time before switching to
standby mode.
If a button other than [Never] is selected, set a "Standby after" time
that is longer than the "Logout after" time.