Fujitsu fi-6010N Operator's Manual page 150

8. For "Authentication", specify whether or not to save the entered "User Name" and
"Password".
When the [Remember] button is selected, the "User Name" and "Password" set here are
saved.
When the [Each Time] button is selected, the "User Name" and "Password" set here are not
saved.
ATTENTION
9. For "Protocol", specify how to access the FTP server.
When the [FTP] button is selected, the FTP server will be connected without SSL encryp-
tion.
When the [FTPS] button is selected, the FTP server will be connected through SSL encryp-
tion.
10. Set a "Port Number" for the FTP server.
The default number is 21. Numbers from 1 to 65535 can be set.
11. For "Proxy", specify whether or not a proxy is to be used.
The "Proxy" setting is only available when a proxy server has been set on the "Proxy Server"
screen.
When the [ON] button is selected, the FTP connection is via the proxy server specified on
the "Proxy Server" screen.
When the [OFF] button is selected, the FTP server is connected to directly, without using the
proxy server.
12. For "Passive Mode", specify whether or not to access in passive mode.
"Passive Mode" can be selected only when the [FTP] button is selected in
When the [ON] button is selected, the FTP server is connected in passive mode.
When the [OFF] button is selected, the FTP server is connected in active mode.
When the [FTPS] button is selected in
13. For "Encryption", specify the type of encryption.
"Encryption" can be selected when the [FTPS] button is selected in
When the [Explicit] button is selected, the FTP server will be connected without SSL
encryption, and encryption will start before user name and password are authenticated.
When the [Implicit] button is selected, SSL encryption will work when the FTP server con-
nection is started.
14. Press the [OK] button.
⇒
User authentication may be required to access the FTP server. Then, the network folder is
added to the network folder list.
116
Only the user name and password saved on the administrator screen dur-
ing operations is valid here.
Step 9, the FTP server is connected in passive mode.
Step 9.
Step 9.