Scanner Registration; Network Connection - Fujitsu fi-6010N Operator's Manual

■ Scanner Registration

Sets whether to reject registration of a scanner whose configuration information is not set.
• Automatically add new scanners to the scanners configuration when they appear
Select the checkbox to reject registration of a new scanner without scanner configuration
information.
If the checkbox is selected, a scanner without configuration information cannot be registered
to the Central Admin Server. Scanner configuration information can be set from the "Scan-
ner List & Config" window displayed by selecting the [Scanner List & Config] button in the
Central Admin Console main window.

■ Network Connection

Sets up the network to communicate with scanners and the Central Admin Console.
• Central Admin Console Port Number
Enter the port number used to communicate with the Central Admin Console.
The default is "10444". The value can be specified within the range of 1 to 65535.
• Use HTTPS to communicate with scanners
Select the checkbox to use HTTPS to communicate with scanners.
• Scanner Communication Port Number
Enter the port number used to communicate with scanners using http/https.
The default is "80". The value can be specified within the range of 1 to 65535.
• Maximum Connections
Select the maximum number of scanners that can be connected simultaneously to the Central
Admin Server.
The default is "5".
• Wake-On-LAN
Configures the WakeOnLAN settings to start the scanner to be controlled from the Central
Admin Server.
• Port Number
Enter the port number to be used to send magic packet for WakeOnLAN.
The default is "443". The value can be specified within the range of 1 to 65535.
• # Tries
Select the number of times magic packet is sent for WakeOnLAN.
The default is "3".
• Interval
Select the interval for sending magic packet for WakeOnLAN.
The default is "3" sec.
5.5 Setting the Central Admin Server
Network Scanner fi-6010N Operator's Guide
5
195