Setting The Destination For Alert Notifications - Fujitsu fi-6010N Operator's Manual

4.6.15 Setting the Destination for Alert Notifications

Touch
Panel
An e-mail address can be specified to which an alert notification will be sent whenever a scanner
alert situation occurs.
It is necessary to set a SMTP server before alert notifications can be sent. For more details about
how to set an SMTP server, refer to
When the destination for alert notification is set, alert notification messages will be sent to the reg-
istered e-mail address in the following title.
Network Scanner (Scanner Name: xxxx) Alert Notification message
For more details, refer to
1. Select the [Network Settings] tab on the top menu.
2. Select the [Alert Notification] tab on the left side menu.
⇒
The "Alert Notification" screen appears.
3. Enter an e-mail address to which the alert notification will be sent.
For details about e-mail address settings values, refer to
ues" (page
4. To confirm that the entered e-mail address is valid, press the [Test] button.
Check that the test mail successfully arrives at the expected e-mail address.
5. Press the [OK] button.
⇒
The destination for alert notifications is set.
122
Central
Admin
Admin
Tool
"D.1.3 Alert Monitor System Log Messages" (page
386).
"4.6.11 Setting the e-Mail Server (SMTP Server)" (page
405).
"B.1 e-Mail Address Setting Val-
92).