Setting The Options For Automatic Redialing - Canon LASER CLASS 1060P User Manual

2
Press Stop.
• Your unit asks you to confirm that you
want to cancel automatic redialing.
3 Press T to cancel redialing.
• Redialing is not canceled until you press
T.
• If you change your mind and want to
continue redialing, press #.
• The unit prints an ERROR TX REPORT
(1 p. 11-4).

Setting the Options for Automatic Redialing

You can set the following options for automatic redialing:
• Whether the unit redials automatically (default: on).
• The number of times the unit attempts to redial (default: twice).
• The time interval between redialing attempts (default: two minutes).
Follow this procedure to adjust the automatic redialing options:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
4 Use ∂ or ¨ to select TX SETTINGS.
5
Press Set.
Use ∂ or ¨ to select AUTO REDIAL.
6
7
Press Set.
7-10
Sending Faxes
CANCEL? AYES #NO
YES=(A) NO=(#)
DATA REGSTRATION
USER SETTINGS
TX SETTINGS
ECM TX
AUTO REDIAL
Ex:
ON
Chapter 7