Switching Temporarily To Tone Dialing - Canon LASER CLASS 1060P User Manual

Switching Temporarily to Tone Dialing

Many information services for banks, airline reservations, hotel reservations, etc.,
require tone dialing for their services. If your unit is set for pulse dialing
(1 p. 3-8), follow this procedure to set your unit temporarily for tone dialing:
n
To talk to the other party, you will need to connect the optional handset or a telephone to
your unit (1 p. 2-7).
1
Press Hook.
• You can also lift the handset instead of
pressing Hook.
2
Use the numeric buttons to dial the
telephone number of the information
service.
• Your unit connects using the pulses
required by your telephone line.
3
When the recorded message of the
information service answers, press T
(Tone) to switch to tone dialing.
• When T (Tone) is pressed, T is
displayed in the LCD.
• If you pressed Hook in step 1, you can
pick up the handset if you need to talk
to the other party.
4
Use the numeric buttons to enter the
numbers requested by the information
service.
• Numbers entered after pressing T
(Tone) will be dialed using tone dialing.
5
When you have finished, press Hook
to disconnect the call.
• If you used the handset, hang up to
disconnect the call.
• Tone dialing is canceled when you
disconnect the call.
Chapter 9
TEL=
Ex:
TEL= 7654321
Ex:
TEL= 7654321T
Ex:
TEL=7654321TA34
Special Features
9-3