Canon LASER CLASS 1060P User Manual page 119

If you selected FAX/TEL AUTO SW in step 10 (on page 8-11):
11
Press Set twice.
12
Use the numeric buttons to enter the
time the unit waits before ringing when
it receives a call.
• You can select from 0 to 30 seconds.
13
Press Set twice.
14
Use the numeric buttons to enter the
time the unit rings while waiting for
someone to answer the call.
• You can select from 10 to 45 seconds.
15
Press Set twice.
16 Use ∂ or ¨ to select the DEFAULT
ACTION setting you want.
• This setting tells the unit what to do if
no one answers within the specified
ring time set in step 14.
• You can select from the following:
– RECEIVE (Switch to receive mode)
– DISCONNECT (Disconnect the call)
17
Press Set.
18
Press Stop to return to standby mode.
n
When the RX MODE setting is set to DRPD, no other receive mode can be selected with
the Receive Mode button.
Chapter 8
RING START TIME
Ex:
8SEC
Ex:
9SEC
F/T RING TIME
Ex:
15SEC
Ex:
30SEC
DEFAULT ACTION
Ex:
RECEIVE
INCOMING RING
Ex:
12/27 DRPD
Receiving Faxes
8-13