Installing The Toner Cartridge - Canon LASER CLASS 1060P User Manual

Installing the Toner Cartridge

This section describes how to install the toner cartridge in the unit for the very first time.
If you are replacing a used toner cartridge, see p. 12-6.
Before installing the toner cartridge, be sure to read the following:
• Use only FX-3 toner cartridges in your unit.
• Keep the toner cartridge away from computer screens, disk drives, and floppy disks.
The magnet inside the toner cartridge may harm these items.
• Do not store the toner cartridge in direct sunlight.
• Avoid locations subject to high temperature, high humidity, or rapid changes in
temperature. Store the toner cartridge between 32° and 95°F (0° and 35°C).
• Do not expose the toner cartridge to direct sunlight or bright light for longer than five
minutes.
• Store the toner cartridge in its protective bag. Do not open the bag until you are ready
to install the toner cartridge in the unit.
• Save the toner cartridge's protective bag in case you need to repack and transport
the toner cartridge at a later date.
• Do not store the toner cartridge in a salty atmosphere or where there are corrosive
gases such as from aerosol sprays.
• Do not remove the toner cartridge from the unit unnecessarily.
• Do not open the drum protective shutter on the toner cartridge.
Print quality may deteriorate if the drum surface is exposed to
light or is damaged.
• Hold the toner cartridge by its handle so that your hand is
not touching the drum protective shutter.
• Do not stand the toner cartridge on end, and do not turn it
upside down. If toner becomes caked in the toner cartridge,
it may prove impossible to free it even by shaking the toner
cartridge.
c
Do not place the toner cartridge in fire. Toner powder is flammable.
2-12
Setting Up Chapter 2