Sending The Same Document To Several Fax Numbers (Sequential Broadcasting) - Canon LASER CLASS 1060P User Manual

Sending the Same Document to Several
Fax Numbers (Sequential Broadcasting)
This feature, also called Sequential Broadcasting, allows you to send the same
document to several fax numbers in one operation. Simply load the document, enter
the fax numbers, and the unit will then scan the document into its memory and send
the document to all the fax numbers you entered, one after the other.
You can send the same document to as many as 125 fax numbers using this feature.
Please note, however, that the fax numbers you enter must be registered for one-touch
or coded speed dialing (1 Chapter 6). You will only be able to enter one fax number
using regular dialing (i.e. with the numeric buttons).
n
If you frequently send documents to the same group of fax numbers, you can register
these numbers for group dialing instead (1 p. 6-13). This will simplify dialing.
Follow this procedure to send the same document to several fax numbers:
1
Load the document, face down in the
ADF (1 p. 4-3).
• To adjust the resolution and contrast,
see pp. 7-2, 7-3.
• You may be unable to send if the
memory used (shown in the LCD) is
close to 100%. To free up space in the
unit's memory: print, send, or delete any
documents you no longer need to be
stored in memory (1 p. 9-4).
2
Enter up to 125 fax numbers using
any of the following methods:
One-touch speed dialing:
Press the one-touch speed dialing
button(s) you want.
Coded speed dialing:
Press Coded Dial, then use the
numeric buttons to enter the two-
digit code you want. Repeat for other
codes.
• Be sure to press Coded Dial before
each code.
Regular dialing:
Use the numeric buttons to enter the
fax number you want, then press
Set.
• You can only enter one fax number this
way.
7-12
Sending Faxes
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
Ex:
TEL=905 795 1111
Ex:
A01
Ex:
TEL=03 3758 2111
Ex:
TEL= 2 887 0166
Chapter 7