Scanning A Document Into The Polling Box; Changing Or Deleting The Polling Box Settings - Canon LASER CLASS 1060P User Manual

Scanning a Document into the Polling Box

Follow this procedure to store a document in the polling box so that other fax machines
can retrieve it:
n
You need to set up the polling box before you can scan a document into the polling box
(1 p. 9-11).
1
Load the document, face down in the
ADF (1 p. 4-3).
• To adjust the resolution and contrast,
see pp. 7-2, 7-3.
• You may be unable to scan if the
memory used (shown in the LCD) is
close to 100%. To free up space in the
unit's memory: print, send, or delete any
documents you no longer need to be
stored in memory (1 p. 9-4).
2
Open the one-touch speed dial panel.
3
Press Polling.
4
Press Set.
• The unit scans the document into the
polling box.
When another fax machine polls your unit, the following conditions apply:
• If you registered a password for the polling box, the other party's fax machine must
request the document with this exact same password.
• If you have not registered a password for the polling box, but the other fax machine
requests the document from your unit with a password, the document cannot be
retrieved.

Changing or Deleting the Polling Box Settings

Follow this procedure to change or delete the polling box settings:
n
You will be unable to delete the polling box settings if you have scanned a document into
the polling box (see above). Delete the document from memory first before following the
procedure below (1 p. 9-8).
1
Open the one-touch speed dial panel.
9-14
Special Features
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
POLLING TX
Chapter 9