Summary Of Reports And Lists - Canon LASER CLASS 1060P User Manual

Summary of Reports and Lists

The table below shows the lists and reports that can be printed from your unit. Refer to
the pages indicated for more details.
Report or List
USER'S DATA LIST
ACTIVITY REPORT
TX (Transmission) REPORT
RX (Reception) REPORT
MULTI TX/RX (Transaction)
REPORT
DOC. MEMORY LIST
MEMORY CLEAR REPORT
1-TOUCH SPD DIAL LIST 1
1-TOUCH SPD DIAL LIST 2
CODED SPEED DIAL LIST 1
CODED SPEED DIAL LIST 2
GROUP DIAL LIST
11-2
Reports and Lists
Description
Lists the current settings of your unit and the
registered sender information.
Shows recent facsimile transactions performed
by your unit.
You can enable or disable automatic printing
of this report after every 20 transactions. You
can also manually set the unit to print it.
Prints after transmission of a document.
You can enable or disable this feature, or set
the unit to print a report only when an error
occurs.
You can also set the unit to print the first page
of the document under the report to remind
you of the contents of the document.
Prints after reception of a document. You
can enable or disable this feature, or set
the unit to print a report only when
an error occurs.
Prints after sending the same document to
several fax numbers, or after polling multiple
fax numbers in one operation.
Lists the documents currently stored in the
unit's memory.
Prints automatically when power is restored
to the unit after a power failure. Lists the
documents deleted from memory.
Lists the numbers and names registered
under one-touch speed dialing buttons.
Lists the numbers and names registered
under coded speed dialing codes.
Lists groups registered under one-touch
speed dialing buttons and coded speed
dialing codes.
Details
p. 14-2
p. 11-3
p. 14-5
p. 11-4
p. 14-5
p. 11-5
p. 14-5
p. 11-5
p. 9-4
p. 13-21
p. 6-19
p. 6-20
p. 6-21
Chapter 11