Redialing; Manual Redialing; Automatic Redialing With Memory Sending; Canceling Automatic Redialing - Canon FAX-L380 User Manual

Redialing

Manual Redialing

To redial the last number dialed with the numeric buttons, press [Redial/Pause].
To cancel manual redialing, press [Stop/Reset]

Automatic Redialing With Memory Sending

With memory sending, you can set the machine to automatically dial the fax number again if the
receiving fax machine does not answer or if the line is busy. You can also control how many times the
machine will redial the number and how long it will wait between dialing attempts. See "Setting Up
Automatic Redialing*," on p. 6-11.

Canceling Automatic Redialing

If you press [Stop/Reset] when waiting to redial, the LCD displays standby mode but you are still in
automatic redialing. To cancel redialing while the machine is waiting to redial, follow the procedure
described in "Deleting a Fax Job," on p.11-2. To cancel while the machine is redialing, do the following:
Wait until the machine begins redialing.
While the machine is waiting to redial, the LCD displays <AUTO REDIAL>.
Press [Stop/Reset]
NOTE
The machine can print a list of document stored in memory (DOCUMENT MEMORY LIST), along with the
transaction number of each document. The document waiting to be sent using automatic redialing will be listed as
<TRANSMIT>. To print the list, see "Document Memory List," on p. 12-10.

Setting Up Automatic Redialing*

You can set up the following options for automatic redialing:
• Whether or not the machine redials automatically
• The number of times the machine attempts redialing
• The time interval between redialing attempts
* The default settings for the auto redial feature vary depending on the country. For details, see Appendix C, "Default
Settings for Each Country."
[ (-)].
[ (-)].
6
Redialing 6-11