Canon LASER CLASS 1060P User Manual page 117

3
Press Set.
Use ∂ or ¨ to select RX SETTINGS.
4
5
Press Set.
Use ∂ or ¨ to select RX MODE.
6
7
Press Set.
Use ∂ or ¨ to select DRPD.
8
9
Press Set.
Use ∂ or ¨ to select the type of ring
10
pattern you want to set.
• You can select from the following:
– NORMAL RING
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
– FAX/TEL AUTO SW (Go to step 11 on page 8-13)
If you selected a setting other than FAX/TEL AUTO SW in step 10:
11
Press Set twice.
12
Use the numeric buttons to enter the fax/
telephone number assigned for
receiving a call for the ring pattern you
selected in step 10 (max. 20 digits,
including spaces).
• This number is transmitted to the
caller's fax machine and displayed in
the caller's LCD as verification.
• To enter a space, press Space.
• To enter a plus sign (+) before the
number, press +.
• If you make a mistake, press Clear and
start again.
Chapter 8
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
DRPD
NORMAL RING
UNIT TELEPHONE #
Ex:
TEL=
Ex:
TEL= 123 4567
Receiving Faxes
8-11