Deleting A Document Stored In Memory - Canon LASER CLASS 1060P User Manual

Deleting a Document Stored in Memory

Follow this procedure to delete a document stored in memory:
1
Open the one-touch speed dial panel.
2
Press Memory Reference.
Use ∂ or ¨ to select DELETE
3
DOCUMENT.
4
Press Set.
Use ∂ or ¨ to select the transaction
5
number (TX/RX NO.) of the
document you want to delete.
• If you are unsure of the transaction
number (TX/RX NO.), print the DOC.
MEMORY LIST (1 p. 9-4).
• A "#" before the transaction number
(TX/RX NO.) indicates that that
document is being sent at that moment.
If you want to delete a document being
sent, follow the instructions in the LCD.
• Use ¬ or ® to display details of the
transaction (e.g. destination).
6
Press Set.
• If you are deleting a document stored in
the polling box (1 p. 9-14), enter the
password that restricts access to the
polling box settings, then press Set.
7 Press T to delete the document.
• If you change your mind and want to
keep the document in memory, press #.
8
To continue deleting other documents
in memory, repeat the procedure from
step 5.
-or-
Press Stop to return to standby mode.
9-8
Special Features
DOC. MEMORY LIST
DELETE DOCUMENT
Ex:
TX/RX NO.
Ex:
TX/RX NO. #0003
OK TO DELETE?
YES=(A) NO=(#)
ERASING END
Ex:
12/27 FaxTel
0001
Chapter 9