Canon LASER CLASS 1060P User Manual page 168

Message
REC'D IN MEMORY
SELECT POL REJCT
SUBADD TX REJECT
TX/RX CANCELLED
TX/RX NO. nnnn
TX/RX NO. nnnn
SCANNING P.nnn
MEMORY FULL
(Three messages toggle.)
13-12
Troubleshooting
Error Code Cause
— The unit received the fax
in memory because
paper or toner ran out, or
a paper jam occurred
during reception.
#082 You attempted to poll a
fax machine with a
subaddress, but the other
party has not set a
subaddress or their fax
machine does not
support polling with a
subaddress.
#080 You attempted to send a
document with a
subaddress, but the other
party's fax machine does
not support reception
with a subaddress.
— You pressed Stop to
cancel a transaction.
— The number shown
(nnnn) is a unique
identification number
assigned to the
document you are
sending or receiving.
— The unit is sending a
document and its
memory is full.
Action
Load paper in the multi-
purpose tray (1 p. 2-15),
replace the toner cartridge
(1 p. 12-6), or clear the
paper jam (1 p. 13-3).
Contact the other party to
check their settings. If their
fax machine does not
support polling with a
subaddress, delete the
subaddress you have
registered (1 pp. 6-3, 6-8).
Contact the other party to
check their settings. If their
fax machine does not
support reception with a
subaddress, delete the
subaddress you have
registered (1 pp. 6-3, 6-8).
—
This number appears in
reports so you can identify
transactions. Write the
number down if you will
need it later.
The unit continues to send
the document as memory
becomes available.
Chapter 13