Choosing A Location For The Laser Class; Dimensions - Canon LASER CLASS 1060P User Manual

Choosing a Location for the LASER CLASS

Before unpacking your unit, be sure to choose a suitable location for it (1 p. 1-8).

Dimensions

Make sure the location you choose provides enough space around the unit for
adequate ventilation, and to allow paper to flow freely into and out of the unit. Leave
approximately 4 inches (10 cm) space around all sides of the unit. The illustrations
below show the dimensions of the unit.
TOP VIEW
SIDE VIEW
BOTTOM VIEW
n
If you need help installing the unit or have any questions about it, please
contact your local authorized Canon Facsimile Dealer.
2-2
Setting Up
22.8" (578 mm)
15.8" (401 mm)
22.8" (578 mm)
22.8" (578 mm)
15.8" (401 mm)
Chapter 2