Canon LASER CLASS 1060P User Manual page 2

Copyright
This User's Guide is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under
the copyright laws, this User's Guide may not be reproduced in any form, in whole or
part, without prior written consent of Canon U.S.A.
© 2001 Canon U.S.A., Inc.
Disclaimer
Canon U.S.A., Inc. has reviewed this User's Guide thoroughly in order to make it an
easy to use guide for your Canon LASER CLASS 1060P system. All statements,
technical information, and recommendations in this guide and in any guides or related
documents are believed reliable, but the accuracy and completeness thereof are not
guaranteed or warranted, and they are not intended to be, nor should they be
understood to be, representations or warranties concerning the products described.
Your LASER CLASS 1060P has been sold to you subject to the limited warranties set
forth in the warranty cards. Further, Canon U.S.A. reserves the right to make changes
in the specifications of the products described in this guide at any time without notice
and without obligation to notify any person of such changes.
Trademarks
Canon and LASER CLASS are registered trademarks, and UHQ is a trademark of
Canon Inc.
All other product and brand names are registered trademarks, trademarks or service
marks of their respective owners.
* Approximately three seconds per page document transmission time based on ITU-T No. 1 Chart,
standard mode, at 33.6 Kbps modem speed. The Public Switched Telephone Network (PSTN) currently
supports 28.8 Kbps modem speeds or lower, depending on telephone line conditions.
ii
E S
As an NERGY TAR
the LASER CLASS 1060P meets the
for energy efficiency.
Super G3 is a phrase used to describe the new generation of fax
units that use ITU-T V.34 standard 33.6 Kbps* modems. Super G3
High Speed Fax units allow transmission time of approximately
three seconds* per page which results in reduced telephone line
charges.
Partner, Canon U.S.A. has determined that
®
E
NERGY
S
TAR ® guidelines
Preface