Sending A Document Stored In Memory - Canon LASER CLASS 1060P User Manual

Sending a Document Stored in Memory

Follow this procedure to send a document received in memory or stored in the polling
box (for polling sending):
1
Open the one-touch speed dial panel.
2
Press Memory Reference.
Use ∂ or ¨ to select RESEND
3
DOCUMENT.
4
Press Set.
5 Use ∂ or ¨ to select the transaction
number (TX/RX NO.) of the
document you want to send.
• If you are unsure of the transaction
number (TX/RX NO.), print the DOC.
MEMORY LIST (1 p. 9-4).
• A "#" before the transaction number
(TX/RX NO.) indicates that that
document is being sent or printed at that
moment, and can therefore not be
selected.
• Use ¬ or ® to display details of the
transaction (e.g. destination).
6
Press Set.
• If you are sending a document stored in
the polling box (for polling sending),
enter the password (when you have set
a password), then press Set.
7
Enter up to 125 fax numbers you want
to send to using any of the following
methods:
One-touch speed dialing:
Press the one-touch speed dialing
button(s) you want.
Coded speed dialing:
Press Coded Dial, then use the
numeric buttons to enter the two-
digit code you want. Repeat for
other codes.
• Be sure to press Coded Dial before
each code.
9-6
Special Features
DOC. MEMORY LIST
RESEND DOCUMENT
Ex:
TX/RX NO.
Ex:
TX/RX NO. #5003
SELECT LOCATIONS
TEL=
Ex:
TEL=905 795 1111
Ex:
A01
Ex:
TEL=03 3758 2111
0001
Chapter 9