CHAPTER 8 INSTALLATION
D. Cleaning the Parts and Making Checks
Step
1
Clean the charging wire using the
primary charging wire cleaning lever.
2
Clean the charging wire using the
transfer charging wire leaning lever.
3
Take out the static eliminator, and
clean it using the static eliminator
cleaner stored behind the front door.
Thereafter, set the static eliminator
and the static eliminator cleaner back
to their initial positions.
4
Remove the inside cover (2 screws).
8–6
COPYRIGHT © 1998 CANON INC.
Work
CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Checks/remarks
Clean as if to sweep the inside of the groove of
the static eliminator.
Screws
Static eliminator
cleaning brush