Using Adjust Mode And Function Mode - Canon NP7160 Service Manual

C. Using Adjust Mode and Function Mode
In adjust mode and function mode, the copier stores the settings made on the control panel in
the RAM on the DC controller PCB and use them to simulate the functions of conventional
variable resistors and switches.
Figure 10-701 shows the information sheet stored behind the copier's front door. Each copier
is adjusted at the factory, and the adjustment values are recorded in the sheet.
If you have replaced the DC controller PCB or initialized the RAM, you will have to enter
the values recorded in the information sheet into the RAM on the DC controller PCB. Moreover,
if you have entered any values newly in the field, be sure to record the value in this sheet.
COPYRIGHT © 1998 CANON INC.
301 AE_ADJ
302 LMP_ADJ
303 AE_SLOP
305 REGIST
306 LE_BLANK
307 PG_RGST
308 PG_BLANK
309 TE_BLANK
319 MF_ARCH
320 CST1_ARCH
321 CST2_ARCH
326 LIGHT_5
327 LNS_HP
328 MIRR_HP
329 LNS_TBL
330 MIRR_TBL
331 MLT_CL
332 MLT_TMG
519
MODEL_SW
701 DOC_ST_L
Figure 10-701
CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
TYP
10–83