Vii.installing The Accessory Heater; Installing The Heater Switch - Canon NP7160 Service Manual

VII.INSTALLING THE
ACCESSORY HEATER
A. Installing the Heater Switch
1) Remove the rear cover, and cut off the
face plate [1].
2) Mount the heater switch [2] with two
screws [3].
3) Lead the heater switch harness through
the clamp, and connect it to the connector
[4].
COPYRIGHT © 1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
[1]
Figure 8-701
[3]
[2]
Figure 8-702
Figure 8-703
[4]
8–25