User Mode - Canon NP7160 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
B. User Mode
1. Outline
The copier provides user modes, which may be changed freely by the user. These modes
provide the functions shown in the following table.
Notation Item
Resetting
U00

user mode

Changing auto
clear time
U01
Changing auto
U02
power-save time
Changing auto
U03
power-off time
Fine-adjusting
Zoom
U04
Turning on/off
auto cassette
change
U05
Turning on/off
auto sort
U06
Turning on/off
ADF jam
U07
recovery
Cleaning feeder
U08
1–12
COPYRIGHT © 1998 CANON INC.
Description
Use it to reset new settings made in user
mode to default settings.
Use it to set the auto clear time length
between 1 an 9 min in 1-min increments.
Setting it to 0 disables the auto-clear
function.
Use it to select an appropriate auto power-
save time length: 10, 15, 20, 30, 40, 50, 60,
or 90 min (8 lengths).
Use it to select an appropriate auto power-
off time length: 10, 15, 20, 30, 40, 50, 60, 90
(8 lengths).
Use it to adjust vertical and horizontal
reproduction ratios over 5 grades in 0.2%
increments.
Rang: -1.0% to +1.0% in units of 0.2%
Use it to turn on/off the auto cassette change
function, in which copying is continued by
switching cassettes when the selected
cassette runs out of paper.
O N : Enable auto cassette change.
OFF : Disable auto cassette change.
Use it to turn on/off the auto sort function, in
which sorting takes place when making
multiple copies of multiple originals using
an ADF.
O N : Enable auto sort.
OFF : Disable auto sort.
Use it to turn on/off auto counting of
originals in ADF jam recovery.
O N : Enable auto count.
OFF : Disable auto count.
Use it to clean the feeder (after placing
paper in the ADF and pressing the Start
key).
CANON NP7160/NP7161 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Factory settings
(default)
–
2 min
15 min
30 min
0.0%
ON
ON
OFF
–