Pick-Up/Feeding System; Adjusting The Pressure Of The Separation Pad; Changing The Cassette Size - Canon NP7160 Service Manual

CHAPTER 10 TROUBLESHOOTING
D. Pick-Up/Feeding System

1. Adjusting the Pressure of the Separation Pad

If double feeding or pick-up failure occurs, loosen the adjusting screw [1] and relocate the
holder [2] to adjust the force of the separation pad tension spring.
• If pick-up occurs, move the holder in the direction of [A].
• If double feeding failure occurs, move the holder to in the direction of [B].
2. Changing the Cassette Size (AB/INCH)
1) Slide out the cassette.
2) Loosen the mounting screw [1] on the left side of the cassette; then, slide the size switching
block [2] to the desired size position, and fix it in position.
10–14
COPYRIGHT © 1998 CANON INC.
[2]
[1]
Figure 10-219
•AB
[2] [1]
Figure 10-220
CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[A]
[B]
[2] [1]
•INCH