Canon NP7160 Service Manual page 157

3) Remove the drum unit. (See p. 4-28.)
4) Remove the delivery upper cover. (See p.
7-11.)
5) Remove the delivery lower cover. (See p.
7-11.)
6) Disconnect the two connectors [2] (J108,
J109) on the DC controller PCB, and free
the wires from the harness guide.
7) Remove the front door.
8) Turn the screw [3] counterclockwise, and
remove the fixing knob [4].
9) Remove the two mounting screws [5], and
remove the fixing front cover [6].
10) Disconnect the connector [7], and free the
harness from the harness guide.
11) Remove the two mounting screws [8].
COPYRIGHT © 1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
Figure 6-204
[4]
[3]
[5]
Figure 6-205
[7]
[8]
Figure 6-206
[2]
[6]
6–9