Copyboard Glass - Canon NP7160 Service Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
C. Copyboard Glass
1. Removing the Copyboard Glass
1) Remove the two mounting screws [1], and
detach the glass retainer (right) [2].
2) Slide the copyboard glass [3] to the right.
3) Remove the two mounting screws [4], and
detach the glass retainer (left) [5].
4) Remove the copyboard glass [3].
Caution:
When mounting the NP7161's
copyboard glass, make sure that the
blue marking on the side of the glass
is to the front left.
7–14
COPYRIGHT © 1998 CANON INC.
[4]
CANON NP7160/NP7161 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
Figure 7-313
[5]
Figure 7-314
[1]
[3]